The Earthworks M50 is a professional measurement microphone intended for large room calibration. The ultra wide frequency response of 3Hz to 50kHz is flat throughout the entire spectrum and results in accurate room calibration using Smaart, MLSSA, SIMM and TEF based systems. The small element yields an omni-directional pattern resulting in a wide pick up area at the front and sides of the microphone capsule. The M50 ships with a microphone clip and a 1/2" calibrator adaptor.
- Miniature Omni-directional Capsule
- The miniature element provides an accurate omni-directional pattern with an even coherent response at the direct and off-axis sections of the microphone capsule.
- Wide Linear Frequency Response
- The wide, linear frequency response accurately captures audio signal and reproduces the slightest nuance with great detail.
- Uncolored Response
- The uncolored, flat signal results in accurate room calibration for indoor and outdoor application.
UPC: 827517150000
In the Box
Earthworks M50 - Measurement Microphone
- Microphone Clip
- ADP1 1/2" Calibration Adaptor
- Fifteen (15) Year Limited Warranty
Transducer | Condenser |
Polar Pattern | Omnidirectional |
Frequency Response | 3 Hz to 50 kHz �1/-3 dB |
Dynamic Range (Typical) | 72 dB |
Signal-to-Noise Ratio | 22 dB SPL Equivalent (A-weighted) |
Maximum Input Sound Level | 142 dB SPL |
Power Requirements | +48V Phantom, 10 mA |
Output Impedance | 600? between pin 2 and 3 |
Output Connectors | XLR intended to drive a balanced transformerless input Pin2+ |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | 9 x 0.9" (229 x 22 mm)(Length x Diameter) |
Weight | 0.5 lb (225 g) |
Packaging Info |
Package Weight | 1.0 lb |
Box Dimensions (LxWxH) | 11.9 x 8.4 x 4.3" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.