- Single
- High Definition 30 kHz Microphone
- Integrated Adjustable Low-Profile Stand
- Height: 7' to 1.5' (2.13m to 45cm)
- Mini Adjustable Gooseneck
- No Exposed Cables
- Microphone Cable Attaches to Base
- Hypercardioid Polar Pattern
- High Gain Before Feedback
The FW730 FlexWand Series 30 kHz High Definition Hypercardioid Microphone from Earthworks incorporates a highly sensitive 30 kHz FlexWand microphone, built into a height adjustable gooseneck stand. The entire microphone system is sleek, low-profile, easy to set up and reproduces audio with incredible detail. The integrated stand is height adjustable. Easily adjust from 7' to 1.5' (2.13m to 45cm) with no exposed cables to create tension or noise.
Setting up the microphone is easy, simply connect microphone cables (sold separately) to the base and you are ready to go. Earthwork's patented high definition microphone technology accurately reproduces frequencies that enhance subtleties and detail. This microphone is an ideal choice for crucial recording applications, sound design, speech applications, performance capturing, and much more.
- Hypercardioid polar pattern
- Frequency response of 30 Hz to 30 kHz
- Near perfect polar response
- For applications requiring a tighter pickup pattern with greater off-axis rejection
- Large flex section near the center of the stand that couples the stand and the wand
- Mini-gooseneck between the end of the wand and the microphone head
- The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 1.5' and 7'
- Substantial improvement in gain before feedback
- The near perfect polar response of the FlexWand allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
- Ideal for miking individual orchestra instruments such as violins and cellos, as well as acoustic guitars and instrument amplifiers
In the Box
Earthworks FW730 FlexWand Series 30 kHz High Definition Hypercardioid Microphone (Single, Cast-Iron Base)
| Polar Pattern | Hypercardioid |
| Frequency Range | 30�Hz to 30�kHz |
| Equivalent Noise Level | 22 dB�A-Weighted |
| Maximum SPL | 145 dB SPL |
| Impedance | 100�ohms |
| Load Impedance | 600�ohms |
| Sensitivity | 10�mV/PA |
| Power Requirements | 48 V |
| Output Connectors | 3-Pin XLR |
| Operating Current Consumption | 10�mA |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
