Gravity I/O expansion shield is made for LattePanda V1 single board computer. Breakouts all GPIO pins to make it compatible with standard Arduino device and no interruption with other ports on LattePanda. Each pin has VCC and GND power port, compatible with Gravity-3 pin colour coded interface supports hundreds of sensors and modules. And this shield also adds a new power solution for LattePanda. 7 to 12V wide range power supply can be used to power the board and devices via DC 2.1 or DC terminal port, maximum 5A under 5V IO output all make the shield prefect for using LattePanda to learning and developing.
- Not compatible with LattePanda Alpha & Delta
- Arduino Leonardo and gravity sensor compatible
- Digital gravity interface x 14, analogue gravity interface x 6
- I2C port x 2, ICSP port x 1
- 5V output voltage, 5V I/O operating voltage
- 5V port maximum output current is 5A, 3.3V port maximum output current is 1A
- 8x8 general 2.54mm prototype pad
- Dimension is 70mm x 68mm / 2.76in x 2.68in
Other details
| Brand |
DFROBOT |
| Part Number |
DFR0491 |
| Quantity |
Each |
| Technical Data Sheet EN |
 |
| Manufacturer Product Page EN |
|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
