D.A.S Audio Event-26A Powered 2-Way Compact Line Array Module (Single)

For Small- to Mid-Sized Venues

2 x 6.5" Woofers + Compression Driver

76 Hz to 19 kHz Frequency Response

800W Peak Class-D Amplifiers

The single D.A.S. Event-26A is a powered, full-range, two-way line array module designed for professional live sound reinforcement applications. The speaker features two built-in Class-D amplifiers, providing 800W of power to the two 6.5" woofers and the 1.75" compression driver that combine to offer a frequency response of 76 Hz to 19 kHz and a peak SPL output of 131 dB. An onboard DSP featuring a 24-bit high-end processor handles X-over, delay, EQ, and limiter functions, while powerful FIR filtering technology offers constant phase response, which translates to transparent sound and remarkable clarity.

The rear panel of the speaker offers a line-level XLR input and an XLR loop-thru output for connecting additional array modules. The integrated "Easy DSP" utilizes push-button combinations for adjusting the number of array modules. Additionally, there is a down-fill preset button for simplifying long and short throw for down-fill applications. Two onboard limiters protect the electronics and drivers from overload.

The lightweight polypropylene enclosure is rugged and able to withstand the rigors of on-the-road wear and tear. A single array module can be placed on a quality speaker stand, while multiples can be used in a ground-stack configuration. Up to 6 line array modules can be flown per side for larger-scaled sound reinforcement deployment. The D.A.S. Event-26A ships with a power cord.

Ultracompact, lightweight powered line array High-efficiency Class-D amplifier with SMPS Dual-voltage mains for use anywhere in the world Easy system configuration thanks to DAScontrol High-end 24-bit DSP with LCD screen FIR processing for constant phase response FSS Fast Set Splay rigging for quick deployment

Configuration	Active 2-Way
Total Power Capacity	800 W Peak
Amplifier Power Rating	LF: 600 W Peak 300 W RMS HF: 200 W Peak 100 W RMS
Amplifier Class	Class-D

HF Driver	1 x 1.75" / 4.45 cm Compression Driver
MF Driver	None
LF Driver	2 x 6.5" / 16.5 cm Woofer
LF Voice Coil	1.5" / 3.8 cm

Frequency Range	76 Hz to 19 kHz -10 dB
Maximum SPL	131 dB
Coverage Angle	100° H
Input Sensitivity	Line Input: +18 dBu
I/O Impedance	Line Input: 20 Kilohms

Audio I/O	XLR 3-Pin Female Balanced Line Input XLR 3-Pin Male Balanced Line Thru
Network I/O	None
USB	None
Wireless Connectivity	None

EQ	None
Parametric EQ	Yes
Semi-Parametric EQ	Yes
Alignment Delay	Yes
Phase Adjustment	Yes

AC Input Power	90 to 250 VAC, 50 / 60 Hz
AC Power Connector	1 x powerCON Input 1 x powerCON Output
Current Consumption	120 VAC: 1.6 A 230 VAC: 0.8 A

Mounting	Integrated Rigging
Construction Material	Polypropylene
Dimensions	19.1 x 18.9 x 8.9" / 485.1 x 480.1 x 226.1 mm
Weight	36.4 lb / 16.5 kg

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.