Bright Tangerine Extension System Mini for Sony VENICE (Expert Kit)

Use the Top Plate for Sony VENICE Extension System Mini from Bright Tangerine to add one 3/8"-16, two 1/4"-20 accessory threads, two MAP MP4 points, and two 1/4"-20 top handle mounts on your extension block. This low-profile plate will not block the extension's drop-in ND filter slot and uses a separately available 4mm hex key for installation.

Attach this Side Plate from Bright Tangerine to the left side of your Sony VENICE cinema camera to expand its mounting capabilities using the Sony VENICE Extension System Mini. Multiple 3/8"-16, 1/4"-20, and MAP M4 threads allow you to mount articulating arms or wireless transmitters onto the side of your camera.

Two screws secure the plate to the camera using a user-supplied 4mm hex wrench. Its aluminum design ensures a durable yet lightweight construction.

Attach this Side Plate from Bright Tangerine to the right side of your Sony VENICE cinema camera to expand its mounting capabilities using the Sony VENICE Extension System Mini. Multiple 3/8"-16, 1/4"-20, and MAP M4 threads allow you to mount articulating arms or wireless transmitters onto the side of your camera.

Two screws secure the plate to the camera using a user-supplied 4mm hex wrench. Its aluminum design ensures a durable yet lightweight construction.

Attach this low-profile Rear Plate from Bright Tangerine onto the back extension block of your Sony VENICE 2 cinema camera to expand its mounting capabilities using the Sony VENICE Extension System Mini. Multiple 3/8"-16, 1/4"-20, and MAP M4 threads allow you to mount articulating arms or wireless transmitters onto the side of your camera.

Four screws secure the plate to the camera using a user-supplied 4mm hex wrench, and it doesn't obstruct the path of the rear extension block connecting cable. Its aluminum design ensures a durable yet lightweight construction.

This aluminum Sliding Top Handle from Bright Tangerine mounts onto your camera's top plate using the included 1/4"-20 screws. It provides multiple 1/4"-20 and 3/8"-16 accessory threads and a shoe mount for adding a variety of accessories.

The handle also features two QD (quick-detach) holes to attach anchors, cables, or camera straps. The handle can slide back and forth for balancing when you unlock the lever, and there are safety stops, so it doesn't completely slide out.

Add 15mm rods to the top of your camera rig using this 15mm LWS Top Bar Bracket from Bright Tangerine. The durable aluminum bracket mounts onto the optional NATO Top Handle using its 3/8"-16 anti-twist mount and provides 15mm LWS rod ports for separately available rods to add accessories such as a follow focus motor or EVF. The bracket can be mounted upright or inverted for different configurations.

The LeftField Mini 15mm LWS Baseplate from Bright Tangerine combines with different interchangeable Bright Tangerine riser blocks and dovetail plates for compatibility with a variety of different cameras, tripods, and gimbals. The baseplate is 40% shorter than the LeftField 3 baseplate, which is ideal for low-profile, compact rigs. Optional Baseplate Mini-compatible riser blocks provide the correct optical height for each camera and can be swapped in as needed.

Using Bright Tangerine's Open?Up quick release system, it allows you to quickly switch between shoulder rigs, tripods, gimbals, and other camera supports. It provides front and rear 15mm LWS rod mounts, as well as side MAP M4 threads for attaching accessories.

The lightweight Create ARRI-Standard Dovetail from Bright Tangerine is an ARRI-standard dovetail that measures 8" in length and features 6.3" of travel. When used with a separately available baseplate, bridge, or clamp, the plate can function as a quick release plate.

The durable aluminum plate incorporates multiple 1/4"-20 and 3/8"-16 threads to mount onto optional bridge plates and rigs, and there are 1/4"-20 center slots for slide balancing. Two removable safety stops on either end ensure the plate doesn't slide out of its mount.

Mount your cinema camera and ensure it is set to 15mm LWS standard optical height when mounted on a variety of camera platforms with this LeftField Mini Standard Riser from Bright Tangerine. The durable aluminum riser is designed to be used with the LeftField Mini Baseplate and cameras that feature 73mm optical center height, such as the Sony FX6, VENICE, or BURANO.

The plate includes four screws to mount it onto the separately available baseplate. Its center slot design allows you to mount the camera using the included 1/4"-20 and 3/8"-16 mounting screws and slide it up and back for balance.

Comfortably support your camera rig with the help of the KASBAH System Handgrip from Bright Tangerine. This lightweight yet durable handgrip has an open design that helps dissipate heat and enhances your grip. This handgrip mounts on your rig using an ARRI-standard (M6) rosette so it can rotate 360? for optimal positioning.

Extend your rosette accessory farther from your rig with the KASBAH Grip Extension Arm from Bright Tangerine. The extension is designed to integrate with the Bright Tangerine KASBAH System and mounts onto a standard ARRI-style rosette to extend a handle or accessory an additional 2.5" from your rig.

The arm features a rosette with a female M6 thread on one end and a male M6 thumbscrew on the other end, and there is a 3/8"-16 anti-twist thread in the center of the arm. It is capable of rotating your accessory or handle 360? using the rosettes.

Extend your rosette accessory farther from your rig with the KASBAH Handle Extension from Bright Tangerine. The extension is designed to integrate with the Bright Tangerine KASBAH System and mounts onto a standard ARRI-style rosette to extend a handle or accessory an additional 1.4" from your rig. It features a rosette with a female M6 thread on one side and a male M6 screw on the other side. The screw is tightened using a 4mm hex wrench.

Securely mount a handle or grip such as a KASBAH handgrip onto your rig with this 3/8" & 1/4" to ARRI Rosette Adapter from Bright Tangerine, part of the Universal Camera Accessory system. This compact adapter features a standard ARRI-style rosette with an M6 thread on one side and both 1/4"-20 and 3/8"-16 screws on the other side for a dual connection with extra security. The 3/8" screw also features anti-twist pins to prevent any movement of your accessory. The screws measure 12.7mm apart.