| ₹ 182765.0 includes GST and import duties. | |
| B2B customers can avail ₹ 27871.66 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
- 100% RF Shielding and Immunity
- Three Hypercardioid Capsules
- Low-Impedance Design
- Tailored for Voice Clarity
- Easy to Install
- Includes Plenum-Rated Junction Box
- Seismic/Fire Strain Relief
- RJ45 Breakout Cable to 3 x Terminal Block
The white M3 Tri-Element Hanging Ceiling Microphone with 4' Cable from Audix is an audio capture solution designed for applications where aesthetics, sound quality, and ease of installation are critical. It can be used for video conferencing, distance learning, courtroom activities, surgical procedures, ambient room miking, and surveillance.
The M3 incorporates three phase-coherent hypercardioid capsules with tailored frequency responses optimized for speech intelligibility. It minimizes frequencies caused by noise, vibration, paper shuffling, fans, and air conditioning. A shielded, silicone-jacket microphone cable ensures a balanced signal and a very clean look.
Furthermore, the electronics above the ceiling are housed in a plenum-rated junction box and cable connections are made via an RJ45 connector. Installation requires drilling a single 5/8" hole in the ceiling. Finally, the M3 mounting hardware adjusts the cable hanging height up to four feet from the ceiling surface without removing ceiling tiles.
- 100% RF shielding and immunity
- Gold-diaphragm condenser capsules with studio-quality sound
- Low-impedance design allows for extremely long cable runs (if required) without cross talk or interference
- Frequency and pattern tailored for voice clarity and rejection of extraneous noise
- Evenly dispersed sound with undetectable phase
- High-quality silicone jacketed microphone cable with adjustable length and position
- Plenum-rated junction box with RJ45 connector
- All visible components of the microphone and cable are the same color
- TAA compliant
- Very high output, low self-noise
- Easy to install
Audix M3 specs
| Transducer Type | Pre-polarized condenser |
| Frequency Response | 30 Hz to 19 kHz |
| Optimized Response | 70 Hz to 9 kHz |
| Polar Pattern | Hypercardioid |
| Output Impedance | 150 Ohms balanced |
| Sensitivity | 34 mV / Pa @ 1 k |
| Off Axis Rejection | 1 capsule >23 dB at 180° relative to 0 2 capsules >18 dB at 120° 3 capsules >9 dB at 60° |
| Signal to Noise Ratio | 72 dB |
| Equivalent Noise Level | 22 dB (A weighted) |
| Maximum SPL for 0.5% THD | ?128 dB |
| Dynamic Range | 106 dB |
| Power Requirements | Phantom power 18 to 52 V |
| Cable/Connector | Phoenix or XLR |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Dimensions (Ø x L) | 2.0 x 1.2" / 50.0 x 30.0 mm |
| Weight | 3.4 oz / 95.0 g |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 179109.7 |
| 3-5 | ₹ 177282.05 |
| 5-10 | ₹ 173626.75 |
| 10+ | ₹ 169971.45 |
Bulk discount will be automatically applied during checkout based on quantity.