Ashton Bentley VX USB-C/HDMI Video & Audio Extender Kit

Extend your transmission of HDMI DCI/UHD 4K60 video signals as well as USB-C device communication up to 100' using the VX USB-C/HDMI Video & Audio Extender Kit from Ashton Bentley. The kit includes a transmitter, receiver, and one power supply for the receiver. The two compact units fit easily into your A/V environment in a classroom, conference room, or event space.

The transmitter inputs HDMI and USB-C signals and sends them via Cat 7/6a cable up to 100' to the receiver. The receiver accepts all the passthrough signals via its RJ45 input and sends them out via its HDMI and USB outputs. The receiver is powered using the included power adapter, and it supplies power to the transmitter via PoC (Power over Cable).

• 2:1 switcher with HDMI and USB-C inputs
• Supports video resolutions up to UHD/DCI 4K50/60 4:4:4
• Bidirectional RS-232 passthrough
• Remotely powered from the VXR via the Cat 6a/7 cable
• ABNET port allows connection of an optional Ashton Bentley Tablebox with touch panel to switch inputs

• Single HDMI output with embedded audio from either the USB-C or HDMI connections at the VXT
• AUX HDMI input, allowing the connection of a video conferencing system or a presentation device. NOTE: this AUX input cannot be selected if there is a source connected to the VXT. Removing all sources from the VXT will result in the VXR automatically switching to the AUX input
• Bidirectional RS-232 passthrough provides connectivity to the VXT for third-party devices
• Stereo analog audio output switched with the video signal to allow the connection of an amplifier and speakers

• The VXT transmitter is installed under a table, in a lectern, or wherever connection to laptops is required
• The VXR receiver is placed near your Video Bar/VC equipment or display/projector
• The two boxes are linked with a single Cat 6a/7 cable, which can be up to 100'
• A 32.8' interconnect cable is included as standard
• Simple to install, with minimal cabling

• An optional USB-C PSU can be connected to provide 100W USB charging power for laptops via the USB-C connection (for VXT)
• There is a mounting position on the VXT back plate for the optional USB-C charging PSU
• The optional Ashton Bentley Tablebox can be used to house your cabling and provides HDMI and USB-C ports
• Ashton Bentley offers locking USB-C and HDMI cables for use with their products to prevent accidental disconnects