APC BR1500G Overview
-
1Description
-
2Battery and Surge Protected Outlets
-
3DataLine Surge Protection
-
4Surge Only Outlets
-
5Energy Management Function
-
6Boost and Trim Automatic Voltage Regulation (AVR)
-
7Green Mode
-
8Customizable Voltage-Transfer Points
-
9Customizable Voltage Sensitivity
-
10Intelligent Battery Management
-
11Cold-Start Capable
-
12Battery Failure Notification
-
13Automatic Self-Test
-
14Transformer-Block Spaced Outlets
-
15Resettable Circuit Breaker
-
16Simple Battery Replacement
-
17USB Connection
-
18LCD Status Display
-
19Audible Alarms
-
20Disconnected Battery Notification
The Power-Saving Back-UPS Pro 1500 (120V) from APC provides power to your important computer components in the event of an electrical outage. The Uninterruptible Power Supply (UPS) contains a battery which continues to power computers, monitors and other components if the electricity is cut from them. An LCD status display provides information including remaining battery life, load capacity, and event notices. The battery is hot-swappable and easy to replace. An audible alarm alerts you of events like power outage and low battery.
Battery and Surge Protected Outlets
Back up and protect your hardware and data during power outages, surges and spikes.
DataLine Surge Protection
Provides protection of connected equipment from power surges on the data lines.
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Customizable Voltage-Transfer Points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Customizable Voltage Sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Intelligent Battery Management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Provides temporary battery power when the utility power is out.
Battery Failure Notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Transformer-Block Spaced Outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Resettable Circuit Breaker
Easy recovery from overloads; no need to replace a fuse.
Simple Battery Replacement
Increases UPS availability by allowing quick, easy battery replacement.
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Provides notification of changing utility power and UPS power conditions
Disconnected Battery Notification
Warns when a battery is not available to provide backup power.
In the Box
- APC Power-Saving Back-UPS Pro 1500 (120V)
- CD with Software
- USB Cable
- User Manual
- Limited 3-Year Warranty
Table of Contents
- Description
- Battery and Surge Protected Outlets
- DataLine Surge Protection
- Surge Only Outlets
- Energy Management Function
- Boost and Trim Automatic Voltage Regulation (AVR)
- Green Mode
- Customizable Voltage-Transfer Points
- Customizable Voltage Sensitivity
- Intelligent Battery Management
- Cold-Start Capable
- Battery Failure Notification
- Automatic Self-Test
- Transformer-Block Spaced Outlets
- Resettable Circuit Breaker
- Simple Battery Replacement
- USB Connection
- LCD Status Display
- Audible Alarms
- Disconnected Battery Notification
APC BR1500G Specs
General
Total Outlets |
10 |
Protected Outlets |
5 x NEMA 5-15R (Battery and Surge) 5 x NEMA 5-15R (Surge Only) |
Plug Type |
NEMA 5-15P |
Data Line Protection |
RJ45 |
Communications |
USB, Serial via RJ45 |
Noise Filtering |
5% |
Power
Surge Energy Rating |
354 Joules |
Maximum Wattage |
865 W |
Nominal Input Voltage |
120 VAC |
Input Frequency |
50/60 Hz ± 3 Hz (Auto Sensing) |
Nominal Output Voltage |
120 VAC |
Output Frequency |
50/60 Hz ± 3 Hz |
Load Capacity |
1500 VA |
Maximum Efficiency |
87% |
Waveform |
Simulated Sine Wave |
Battery
Cells |
1 |
Chemistry |
Lead-Acid |
Recharge Time |
8 Hours |
Replacement Battery |
APCRBC124 APCRBC124J |
Environmental
Operating Temperature |
32 to 104°F / 0 to 40°C |
Operating Humidity |
0 to 95% |
Storage Temperature |
23 to 113°F / -15 to 45°C |
Operating Altitude |
10,000' / 3000 m |
Storage Altitude |
50,000' / 15,000 m |
Certifications |
REACH, RoHS *as per Manufacturer |
Physical
Cable Length |
6' / 1.8 m |
Rackmount Size |
None |
Dimensions (W x H x D) |
11.85 x 4.41 x 15.04" / 301 x 112 x 382 mm |
Weight |
26.6 lb / 12.1 kg |
Packaging Info
Package Weight |
30 lb |
Box Dimensions (LxWxH) |
19.5 x 16 x 9.5" |
APC BR1500G Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.