| ₹ 42260.0 includes GST and import duties. | |
| B2B customers can avail ₹ 6444.65 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
- Output: 810W / 1.35 kVA
- Input: 120 VAC @ 60 Hz ± 3 Hz
- 10 x Battery Backup & Surge Outlets
- 6 x Total NEMA 5-15R Outlets
- 4 x Surge-Only Outlets
- NEMA 5-15P (6' Cord)
- 1080 Joules Surge Energy Rating
- $250,000 Lifetime Equipment Protection
Safely shut down computer systems and guard connected equipment from surges with the Back-UPS 1350VA Battery Backup & Surge Protector from APC . The UPS is armed with a total of ten NEMA 5-15R outlets, with six providing surge and backup power and four designed for surge protection only. In the event of a power outage, the UPS comes equipped with an internal battery that delivers up to 810W of power. The battery-powered outlets provide up to 2.7 minutes of use at full load and over one and a half hours at 50W. For electrical spikes, the UPS has a 1080J surge energy rating. Other notable connections include coax, USB, and Ethernet ports for safeguarding video and network signals. Included along with the backup UPS is a USB cable, a coaxial cable, a USB power adapter, and a downloadable PowerChute software program to monitor energy usage and prevent data corruption by automatically saving files and shutting down a computer system.
- Manageability
-
- Warns when a battery is not available to provide backup power.
- Use your PC to access additional power protection and management features for your UPS via a USB Port.
- Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Provides notification of changing utility power and UPS power conditions.
- Safety
-
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Availability
-
- Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
- Provides temporary battery power when the utility power is out.
- Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Protect equipment with input transformer blocks without blocking access to other receptacles.
- Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- Energy saving feature automatically powers off peripherals when the master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
- Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
- Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Serviceability
-
- Increases UPS availability by allowing quick, easy battery replacement.
- Easy recovery from overloads; no need to replace a fuse.
- Protection
-
- Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
- Provides protection of connected equipment from power surges on the data lines.
- Back up and protect your hardware and data during power outages, surges and spikes.
- Additional Features
-
- Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Energy saving feature automatically powers off peripherals when the master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
- Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment.
- Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
UPC: 731304335344
APC Back-UPS Pro BN 1350VA specs
| Output | Output Power Capacity 810 Watts / 1.35 kVA Max Configurable Power 810 Watts / 1.35 kVA Nominal Output Voltage 120 V Output Frequency (Sync to Mains) 60 Hz +/- 3 Hz Topology Line Interactive Waveform Type Stepped approximation to a sinewave Output Connections 6 x NEMA 5-15R (battery backup) 4 x NEMA 5-15R (selector_surgetitle) Transfer Time 8 ms typical 10 ms maximum |
| Input | Nominal Input Voltage 120 V Input Frequency 60 Hz +/- 3 Hz Input Connections NEMA 5-15P Cord Length 6' / 1.83 m Input Voltage Range for Main Operations 88 - 139 V Maximum Input Current 12.0 A |
| Batteries & Runtime | Battery Type Maintenance-free sealed lead-acid battery with suspended electrolyte: leakproof Included Battery Modules 1 Typical Recharge Time 16 hour(s) Expected Battery Life (years) 3 - 5 |
| Communications & Management | Interface Port(s) USB Control Panel Multi-function LCD status and control console Audible Alarm Alarm when on battery, distinctive low battery alarm, overload continuous tone alarm |
| Surge Protection and Filtering | Surge Energy Rating 1080 Joules Data Line Protection RJ45 10/100/1000 Base-T Ethernet protection, coaxial cable for CATV/SATV/modem/Audio-Video (coax connector) Filtering Full time multi-pole noise filtering, 5% of IEEE surge let-through, zero clamping response time, instantaneous |
| Environmental | Operating Temperature 32 to 104°F / 0 to 40°C Operating Relative Humidity 0 to 95% non-condensing Operating Elevation 0 to 10,000' / 0 to 3000 m Storage Temperature 5 to 104°F / -15 to 40°C Storage Relative Humidity 0 - 95% non-condensing Storage Elevation 0 to 10,000' / 0 to 3000 m Audible Noise at 1 m from Surface of Unit 45.0 dBA |
| Conformance | Approvals FCC Part 15 Class B, NOM, TUV C-US certified Equipment Protection Policy Lifetime: $250,000 |
| Dimensions | 10.24 x 3.94 x 14.49" / 260 x 100 x 368 mm |
| Weight | 22.93 lb / 10.4 kg |
| Packaging Info | |
|---|---|
| Package Weight | 29.0 lb |
| Box Dimensions (LxWxH) | 19.5 x 14.5 x 9.5" |
In the Box
APC Back-UPS Pro BN 1350VA Battery Backup & Surge Protector
- Coaxial Cable
- USB Cable
- Limited 3-Year Repair or Replace Warranty
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 41414.8 |
| 3-5 | ₹ 40992.2 |
| 5-10 | ₹ 40147.0 |
| 10+ | ₹ 39301.8 |
Bulk discount will be automatically applied during checkout based on quantity.