ANALOG DEVICES LTC2855HGN#PBF RS422 / RS485 Transceiver, 20 Mbps, Full Duplex, Idle, Open, Short, 3 to 3.6V Supply, NSSOP-16

LTC2855HGN#PBF is a 3.3V 20Mbps RS485/RS422 transceiver with integrated switchable termination. The driver maintains a high output impedance over the entire common mode range when disabled or when the supply is removed. Excessive power dissipation caused by bus contention or a fault is prevented by current limiting all outputs and by a thermal shutdown. The LTC2855 to withstand ±15kV on the transceiver interface pins without latchup or damage. Application includes low power RS485/RS422 transceiver. level translator, backplane transceiver.

• Integrated, logic-selectable 120 ohm termination resistor
• 3.3V supply voltage, full duplex
• Maximum data rate is 20Mbps min at (TA = 25°C, VCC = 3.3V, TE = 0V)
• No damage or latchup up to ±25kV HBM
• Guaranteed failsafe receiver operation over the entire common mode range
• Current limited drivers and thermal shutdown
• Power up/down glitch-free driver outputs
• Low operating current: 370µA typical in receive mode
• Compatible with TIA/EIA-485-A specifications
• 16 lead plastic SSOP package, operating temperature range from -40°C to 125°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party