ANALOG DEVICES LTC2851CMS8#TRPBF RS422/RS485 Transceiver, 20Mbps, Full Duplex, Idle, Open, Short, 3V to 3.6V Supply, MSOP-8

LTC2851CMS8#TRPBF is a low power, 20Mbps RS485/RS422 transceiver operating on 3.3V supply. The receiver has a one-eighth unit load supporting up to 256 nodes per bus and failsafe feature that guarantees a high output state under conditions of floating or shorted inputs. The driver maintains a high output impedance over the entire common mode range when disabled or when the supply is removed. Excessive power dissipation caused by bus contention or a fault is prevented by current limiting all outputs and by thermal shutdown. Enhanced ESD protection allows this part to withstand up to ±15kV (human body model) on the transceiver interface pins without latchup or damage. Application includes low power RS485/RS422 transceiver, level translator, backplane transceiver.

• Full duplex, no enables
• Compatible with TIA/EIA-485-A specifications
• 3.3V supply voltage
• Maximum data rate is 20Mbps min
• No damage or latchup up to ±15kV HBM
• Guaranteed failsafe receiver operation over the entire common mode range
• Current limited drivers and thermal shutdown, power up/down glitch-free driver outputs
• Low operating current 370µA typical in receive mode
• 10 lead plastic MSOP package, commercial temperature range from 0°C to 70°C
• Delayed micropower shutdown: 5µA maximum

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party