ANALOG DEVICES LT6402CUD-6#PBF Operational Amplifier, Low Distortion, 1 Channels, 300 MHz, 400 V/µs, 4V to 5.5V, QFN, 16 Pins

LT6402CUD-6#PBF is a low distortion, low noise differential amplifier/ADC driver for use in applications from DC to 300MHz. It has been designed for ease of use, with minimal support circuitry required. Exceptionally low input-referred noise and low distortion (with either single-ended or differential inputs) make the device an excellent solution for driving high-speed 12bit and 14bit ADCs. In addition to the normal unfiltered outputs (+OUT and �OUT), the LT6402-6 has a built-in 75MHz differential low pass filter and an additional pair of filtered outputs (+OUTFILTERED, �OUTFILTERED) to reduce external filtering components when driving high-speed ADCs. It is also used in applications such as differential ADC driver for imaging, communications, differential driver/receiver, single-ended to differential conversion, differential to single-ended conversion, level shifting, IF sampling receivers, and SAW filter interfacing/buffering.

• Differential inputs and outputs, additional filtered outputs
• Adjustable output common mode voltage, DC- or AC-coupled operation
• Gain is 6dB typical at (differential (+OUT, �OUT), VIN = ±800mV differential)
• Input offset voltage is 1mV typical at (TA = 25°C, VCCA = VCCB = VCCC = 5V)
• 300MHz typical -3dB bandwidth at (TA = 25°C, VCCA = VCCB = VCCC = 5V)
• Slew rate is 400V/?s typical at (TA = 25°C, VCCA = VCCB = VCCC = 5V)
• Supply current is 30mA typical at (ENABLE = 0.8V, TA = 25°C)
• Power supply rejection ratio is 90dB typical at (4V to 5.5V, TA = 25°C. VCCA = VCCB = VCCC = 5V)
• 1% settling is 10ns typical at (1% settling for a 1VP-P differential step (+OUT, �OUT))
• Operating temperature range from -40°C to 85°C, 16-lead plastic QFN package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party