ANALOG DEVICES LT1376CN8-5#PBF DC-DC Switching Buck Regulator, Fixed, 5 to 25V in, 5V / 1.5A Out, DIP-8

LT1376CN8-5#PBF is a 500KHz monolithic buck-mode switching regulator. A 1.5A switch is included on the die along with all necessary oscillator, control, and logic circuitry. The high switching frequency allows for a considerable reduction in the size of external components. The topology is current mode for fast transient response and good loop stability. Special high-speed bipolar process and new design techniques achieve high efficiency at high switching frequencies. Efficiency is maintained over a wide output current range by using the output to bias the circuitry and by utilizing a supply boost capacitor to saturate the power switch. A shutdown signal will reduce supply current to 20µA on the device. Full cycle-by-cycle short-circuit protection and thermal shutdown are provided. Applications include portable computers, battery-powered systems, battery chargers, and distributed power.

• Inductor size reduced to 5µH, easily synchronizable
• Uses all surface mount components, cycle-by-cycle current limiting
• Switch on resistance is 0.4 ohm maximum at (ISW = 1.5A, VBOOST = VIN + 5V, TA = 25°C)
• Switch frequency is 500KHz typical at (VC set to give 50% duty cycle, TA = 25°C)
• Fixed 5V sense voltage at TA = 25°C
• Shutdown supply current is 15?A typical at (VSHDN = 0V, VIN ? 25V, VSW = 0V, VC open)
• Boost current is 12mA typical at (VBOOST = VIN + 5V, ISW = 500mA)
• Feedback input bias current is 0.5µA typical at (TA = 25°C)
• Operating junction temperature range from 0°C to 125°C
• 8-lead PDIP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party