ANALOG DEVICES ADUM1251WARZ-RL7 Digital Isolator, 2 Channels, 3 V, 5.5 V, SOIC, 8 Pins, 1 Mbps

ADUM1251WARZ-RL7 is a hot-swappable digital isolator with non-latching, bidirectional communication channels that are compatible with I²C interfaces. It eliminates the need for splitting I²C signals into separate transmit and receive signals for use with standalone optocouplers. This device provides one bidirectional channel and one unidirectional channel for applications where a bidirectional clock is not required. It contains hot swap circuitry to prevent glitching data when an unpowered card is inserted onto an active bus. It is approved by DIN VDE V 0884-11:2017-01, reinforced VIORM = 560V peak, 2500V rms for 1 minute per UL 1577, IEC/EN/CSA 62368-1, IEC/CSA 61010-1, CAN/CSA-C22.2 No. 14-18, GB4943.1-2011. It is used in applications such as isolated I²C, SMBus, or PMBus interfaces, multilevel I²C interfaces, power supplies, networking, power over ethernet, hybrid electric vehicle battery management.

• Bidirectional I²C communication, qualified for automotive application
• Open-drain interfaces
• 3V to 5.5V supply/logic levels
• 30mA current sink capability
• 1000KHz operation
• Leakage current is 10µA maximum at (TA = 25°C, VDD1 = 3.3V or 5V)
• Propagation delay is 95ns typical at (side 1 to side 2, rising edge)
• Pulse width distortion is 67ns typical at (side 1 to side 2, (tPLH12 ? tPHL12))
• Common mode transient immunity is 35KV/µs typical at (TA = 25°C)
• Operating temperature range from -40°C to +125°C, 8-lead SOIC package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party