ADATE318 is a complete, single-chip ATE solution that performs the pin electronics functions of a driver, comparator, and active load (DCL), and a four quadrant per pin parametric measurement unit (PPMU). It has VHH drive capability per chip to support flash memory testing applications and integrated 16bit DACs with an on-chip calibration engine to provide all necessary dc levels for operation of the part. The driver features three active states: data high, data low, and terminate mode, as well as a high impedance inhibit state. The inhibit state, in conjunction with the integrated dynamic clamps, facilitates the implementation of a high speed active termination. The output voltage capability is -1.5V to +6.5V to accommodate a wide range of ATE and instrumentation applications. It is used in applications such as automatic test equipment, semiconductor test systems, board test systems, instrumentation and characterization equipment.
- 3-level driver with high-Z and reflection clamps, window and differential comparators
- ±25mA active load, per pin PPMU with -2V to +6.5V range
- Integrated 16bit DACs with offset and gain correction, 1.1W power dissipation per channel
- 3-level voltage range from -1.5V to +6.5V, precision trimmed output resistance
- Unterminated swing is 200mV minimum to 8V maximum
- Differential and single-ended window modes, 1.2GHz input equivalent bandwidth
- External sense input for system PMU, Go/no-go comparators
- Operating temperature is +25°C to +70°C
- Package style is 84-lead LFCSP
Product details
IC Function:
Dual Integrated DCL with Level Setting DAC
|
Supply Voltage Min:
9.5V
|
Supply Voltage Max:
10.5V
|
IC Package Type:
LFCSP-EP
|
No. of Pins:
84Pins
|
Operating Temperature Min:
25°C
|
Operating Temperature Max:
70°C
|
Product Range:
-
|
Automotive Qualification Standard:
-
|
MSL:
MSL 3 - 168 hours
|
Other details
Brand |
ANALOG DEVICES |
Part Number |
ADATE318BCPZ |
Quantity |
Each |
Technical Data Sheet EN |
|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.