ANALOG DEVICES AD8617WARMZ-REEL Operational Amplifier, 2 Channels, 400 kHz, 0.1 V/µs, 1.8V to 5.5V, MSOP, 8 Pins

AD8617WARMZ-REEL is a dual channel, micropower, rail-to-rail input and output amplifier that features low supply current, as well as low input voltage and current noise. The part is fully specified to operate from 1.8V to 5V single supply, or ±0.9V and ±2.5V dual supply. The combination of low noise, very low input bias currents, and low power consumption make the device especially useful in portable and loop-powered instrumentation. The ability to swing rail-to-rail at both the input and output enables designers to buffer CMOS ADCs, DACs, ASICs, and other wide output swing devices in low-power, single-supply systems. It is used in applications such as battery-powered instrumentation, multipole filters, current shunt sense, sensors, ADC pre-drivers, DAC drivers/level shifters, and low-power ASIC input or output amplifiers.

• Offset voltage is 0.4mV typical at (-0.3V <lt/> VCM <lt/> +5.3V, VSY = 5V, VCM = VSY/2, TA = 25°C)
• Input bias current is 0.2pA typical at (VSY = 5V, VCM = VSY/2, TA = 25°C)
• Common-mode rejection ratio is 95dB typical at (0V <lt/> VCM <lt/> 5V, VSY = 5V, VCM = VSY/2, TA = 25°C)
• Supply current/amplifier is 38?A typ at (VO = VSY/2, 0V <lt/> VCM <lt/> 5V, VSY = 5V, VCM = VSY/2)
• Slew rate is 0.1V/?s typical at (RL = 10Kohm, VSY = 5V, VCM = VSY/2, TA = 25°C)
• Settling time to 0.1% is 23?s typical at (G = ±1, VIN = 2V step, CL = 20pF, RL = 1Kohm)
• Gain bandwidth product is 400KHz typical at (RL = 100Kohm, VSY = 5V, VCM = VSY/2, TA = 25°C)
• Voltage noise density is 25nV/?Hz typical at (f = 1KHz, VSY = 5V, VCM = VSY/2, TA = 25°C)
• Large signal voltage gain is 500V/mV typ at (RL = 10Kohm), qualified for automotive applications
• Operating temperature range from -40°C to +125°C, 8-lead MSOP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party