ANALOG DEVICES AD8205WYRZ Operational Amplifier, 1 Channels, 0.5 V/µs, 4.5V to 5.5V, NSOIC, 8 Pins

AD8205WYRZ is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from -2V to +65V. The typical single supply voltage is 5V. Excellent DC performance over temperature keeps errors in the measurement loop to a minimum. Offset drift is typically less than 15µV/°C, and gain drift is typically below 30ppm/°C. The output offset can be adjusted from 0.05V to 4.8V with a 5V supply by using the VREF1 and VREF2 pins. With VREF1 attached to the V+ pin, and VREF2 attached to the GND pin, the output is set at half scale. Attaching both pins to GND causes the output to be unipolar, starting near ground. It is used in applications such as high-side current sensing in motor controls, transmission controls, diesel injection controls, engine management, suspension controls, vehicle dynamic controls, DC-to-DC converters.

• Ideal for current shunt applications, bidirectional operation
• Accuracy is ±1% typical at (VO ? 0.1Vdc, 25°C)
• Offset voltage is ±2mV maximum at (VS = 5V)
• Offset drift is 15µV/°C typical at (VS = 5V)
• Common-mode rejection ratio is 80dB typical at (VS = 5V)
• Small signal -3dB bandwidth is 50KHz typical at (VS = 5V)
• Slew rate is 0.5V/µs typical at (VS = 5V)
• Operating voltage range from 4.5V to 5.5V, quiescent current over temperature is 2mA typical
• Power supply rejection ratio is 70dB minimum at (VS = 5V)
• Operating temperature range from -40°C to +125°C, 8-lead SOIC-N package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party