₹ 397155.0 includes GST and import duties. | |
B2B customers can avail ₹ 60566.14 ITC on this product | |
100% Secure Payments | 100% Genuine product | |
The product is eligible for Free Shipping |
Description
AEA Ribbon Mics R88A Overview
- 1Description
- 2Far-Field Stereo Ribbon
- 3Works up Close
- 4For Blumlein or Mid-Side Configurations
- 5High-Output Active Electronics
- 6Features at a Glance
Capture lush stereo recordings in minimal setup time using any preamp with the AEA Ribbon Mics R88A, an active stereo far-field ribbon microphone designed for quick and precise Blumlein and mid-side configurations on a single mic stand. Offering the open and natural sound of two traditional side-address, large-ribbon mics in a compact and lightweight form factor designed for far-field use, the R88A ribbon mic is ideal when positioned 16" to 20' away from the source, be it for group vocals, acoustic instruments, ensembles, or drums, in the studio or on the stage.
As a far-field ribbon, the R88A provides full low- and high-end tone when capturing sources in the context of a room. Equipped with JFET electronics and a custom transformer, the R88A provides a 12 dB level increase over the passive R88mk2. Plus, it boasts the widest frequency range of any AEA mic (along with the NUVO N8). The figure-8 polar pattern of each ribbon element exhibits the classic pickup traits and side-rejection qualities associated with ribbon mics. The mic's XLR 5-pin male connector and included breakout cable (XLR 5-pin to dual XLR 3-pin) allow hookup to virtually any microphone preamps that can supply 48V phantom power. Due to the active circuitry and stable impedance of the R88A, it does not require a high-gain, high-impedance preamp for optimal performance.
Far-Field Stereo Ribbon
It is designed to be positioned at an ideal distance of 16 inches or farther from the source of sound. This far-field design allows for a wide range of options when positioning the R88A to best capture an instrument within the context of a room.
From as far away as 20 feet away, the R88A retains the low-end frequencies of the sources it captures, and its open, natural tonality makes it perfect to record an entire orchestra or the full low-end of a drum kit from overhead.
Works up Close
For Blumlein or Mid-Side Configurations
As an alternative to Blumlein's technique, the microphone can also be used for mid-side (MS) stereo, providing excellent mono compatibility and full control over the width of the stereo image.
High-Output Active Electronics
The extra 12 dB of output is vital when recording quiet sources like vocals or soft acoustic guitars. The active circuitry also prevents noise interference on long cable runs or when operating near large lighting rigs. The R88A's active circuitry requires standard 48V phantom power to operate. The premium R88A is visually distinguished by a red cable at its base.
Features at a Glance
- Open and natural sound
- Far-field ribbon mic that retains lows and highs from a distance
- Stereo version of the AEA N8 ribbon mic
- 12 dB level increase over the passive R88mk2
- Optimized for all preamps
- Compact, lightweight, and low-profile design
- Handles SPLs up to 141 dB
- Made in the USA
In the Box
- AEA Ribbon Mics R88A Phantom-Powered Stereo Far-Field Ribbon Microphone
- XLR 5-Pin Female to Dual XLR 3-Pin Male Breakout Cable
- Swivel Adapter
- Custom Protective Mic Sleeve
- Storage Case
- Limited 1-Year Warranty, Extendable to 3 Years upon Online Registration
- Description
- Far-Field Stereo Ribbon
- Works up Close
- For Blumlein or Mid-Side Configurations
- High-Output Active Electronics
- Features at a Glance
AEA Ribbon Mics R88A Specs
Form Factor | Stand/Boom Mount |
Sound Field | Stereo |
Stereo/Surround Configuration | Mid/Side, X/Y |
Operating Principle | Pressure Gradient |
Capsule | 2 x Ribbon |
Diaphragm | 2.35" / 59.69 mm |
Polar Pattern | Figure-8 |
Orientation | Side Address |
Circuitry | Solid-State (JFET) |
Pad | None |
High-Pass Filter | None |
Tone Adjustment | None |
Indicators | None |
On-Board Controls | None |
Windscreen | None |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 41 dB SPL (1 kHz, 1% THD) |
Off-Axis Rejection |
6 dB at 60° 6 dB at 120° 0 dB at 180° |
Impedance | 92 Ohms |
Load Impedance | 1000 Ohms |
Sensitivity | 7.4 mV/Pa |
Output Connectors (Analog) | 1 x XLR 5-Pin Male (on Mic) 2 x XLR 3-Pin Male (on Detachable Cable) |
Operating Voltage | 48 V (Phantom Power) |
Operating Current Consumption | 7 mA |
Color | Black |
Mounting | Shockmount (Included) |
Dimensions | ø: 3.9 x H: 15" / ø: 9.9 x H: 38.1 cm |
Weight | 2.6 lb / 1.2 kg |
Package Weight | 5.96 lb |
Box Dimensions (LxWxH) | 18.2 x 8.2 x 7.5" |
AEA Ribbon Mics R88A Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
Quantity | Price |
2 | ₹ 389211.9 |
3-5 | ₹ 385240.35 |
5-10 | ₹ 377297.25 |
10+ | ₹ 369354.15 |
Bulk discount will be automatically applied during checkout based on quantity.