₹ 213945.0 includes GST and import duties. | |
B2B customers can avail ₹ 32626.61 ITC on this product | |
100% Secure Payments | 100% Genuine product | |
The product is eligible for Free Shipping |
Description
- Shoulder Rig for Canon C200
- 360° Adjustable Rosette Dual Handgrips
- Top Plate with Multiple Accessory Mounts
- VCT Pro Baseplate with 15mm Rods
- Balances Weight of Rig over Shoulder
- 10" Horizontal, 1" Vertical Adjustment
- Slide-In Camera Plate
- Made in the USA
The C200 Recoil Pro with Rosette Dual Trigger Grips kit from Zacuto consists of a comfortable shoulder-mounted rig with a dual, 360° rotating handgrip system. Kit components include the VCT Pro baseplate, the Rosette Dual Trigger Grips, and the C200 Top Plate. Use the included top plate to attach accessories via Z-rail and threaded 1/4"-20 and 3/8"-16 mounts.
This Recoil Pro rig distributes your focus, monitoring, and camera controls forward, creating an evenly balanced handheld or tripod-based C200 rig. The right-hand component of the Rosette Dual Trigger Grips relocates your original Canon handgrip to a more comfortable operating position.
Note: This rig requires the addition of a monitor or Zacuto Gratical EVF. To mount an Axis EVF Mount and Gratical, you will need the Z-Rail Axis Mount to attach to your top plate.
- VCT Pro Baseplate
With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto . Use it with all types of cameras, from DSLRs to larger models, like the Alexa.
A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.
The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.
An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.- Key Features
-
- Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
- 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
- VCT14-compatible V-wedge
- 1/4"-20 and 3/8"-16 tripod mount holes
- Ergonomic gel polymer shoulder pad
- 15mm LWS rod adapter on the rear
- Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
- ARRI M6 rosette
- Three 1/4"-20 threaded holes for accessories
- Includes two 6.5" 15mm rods
- 1/4"-20 and 3/8"-16 screws supplied
- Made in the USA
- Rosette Dual Trigger Grips
The Zacuto Rosette Dual Trigger Grips are a 15mm LWS rod mount handgrip set featuring one wooden handgrip and one rosette relocator that allows you to attach any ARRI rosette-mount camera or lens grip. Each can be individually rotated a full 360° at the press a dedicated lever � there is no need to screw or unscrew any knob or lever but rather just press it on the fly. Furthermore, the wooden component of the wooden handgrip can also be adjusted forward and backward at the press of another lever, and same goes for your camera/lens grip once you attach it.
The handgrip and relocator are secured into sleeves and can be adjusted in length within the sleeves by loosening a corresponding lever for each one. They can be adjusted from 13 to 16" in length, measuring from the base to the bottom of the handgrip. Scale markings are available on top to allow you to easily match up the positions of the handgrips. The handgrips are fully removable and you can incorporate a second wooden handgrip at a later time to alternate with the relocator.- Key Features
-
- 15mm LWS rod mount handgrip set
- Includes a wooden handgrip and a rosette grip relocator that supports ARRI rosette-mount camera/lens grips
- 360° rotation at the press of a lever � no screwing/unscrewing
- Forward/backward adjustment at the press of another lever
- Length adjustable
- Scale markings for easily matching the positions of the handgrips
- C200 Top Plate
The Zacuto C200 Top Plate is custom-designed for your Canon C200, forming the base for accessorizing your camera without stressing its body. It has a built-in Z-Rail which is perfect for adding the Recoil Handle, or you can attach your Canon Handle to the plate instead. It has a multitude of 1/4"-20 and 3/8"-16 screw holes. At the back of the plate is a 15mm rod clamp with a spring-loaded locking lever, and a grooved mount for the Canon C200 LCD. You can also mount the Canon LCD to the built-in Z-Rail if so desired.
- The Top Plate features a built-in Z-Rail, 15mm rod clamp, and 51 1/4"-20 and two 3/8"-16 threaded mounting holes, all providing accessory mounting options to extend the ergonomics of your camera.
- The spring-loaded locking lever allows you to tighten or loosen the clamp, even when you can't rotate the lever completely.
- 2 x 6.5" 15mm Rods
- 1/4"-20 Camera Screw
- 3/8"-16 Camera Screw
- Limited Lifetime Warranty
- Dual Trigger Grip Base
- Wooden Handgrip
- Rosette Relocator
- Limited Lifetime Warranty
- 2 x 1/4"-20 Screw
- Limited Lifetime Warranty
- VCT Pro Baseplate
Mount Types VCT14-compatible V-wedge
15 mm LWS rod ports in front and back
1/4"-20 and 3/8"-16 tripod mount holes
1/4"-20 and 3/8"-16 camera screws included
6.5" (16.5 cm) 15mm rods included
ARRI M6 rosette
Three 1/4"-20 threaded holes for accessoriesDimensions 14.25 x 4.25 x 2" (36.2 x 10.8 x 5 cm) (with included 6.5"/16.5 cm rods) Weight 2.1 lb (0.96 kg) Packaging Info Box Dimensions (LxWxH) 10.7 x 7.2 x 3.7" - Rosette Dual Trigger Grips
Material of Construction Aluminum, wood Packaging Info Box Dimensions (LxWxH) 11.0 x 8.3 x 2.0" - C200 Top Plate
Material of Construction Anodized 6061 aluminum Mounting Accessory
51 x 1/4"-20
2 x 3/8"-16
1 x 15 mm rod clamp
1 x Z-RailDimensions 5.89 x 3.9 x 0.37" / 14.96 x 9.91 x 0.94 cm Weight 4.8 oz / 136.1 g Packaging Info Box Dimensions (LxWxH) 5.8 x 2.5 x 1.6"
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
Quantity | Price |
2 | ₹ 209666.1 |
3-5 | ₹ 207526.65 |
5-10 | ₹ 203247.75 |
10+ | ₹ 198968.85 |
Bulk discount will be automatically applied during checkout based on quantity.