Vello Accessory Kit for Canon Rebel T7i

Reach your camera's full potential with the Vello Accessory Kit for Canon Rebel T7i from B &H that includes the BG-C15 Battery Grip, which accepts up to two LP-E17 batteries and doubles the camera's battery life. It also offers a vertical shutter button. To fire your camera wirelessly, the remote has 16 channels to choose from, and a wireless range of 320'. The LCD Screen Protector Ultra defends against damage, and the Cap Keeper ensures your lens cap does not get lost.

• Vello BG-C15 Battery Grip for Canon Rebel T7i and 77D

  The BG-C15 Battery Grip from Vello is designed specifically for the Canon EOS Rebel T7i and 77D DSLR cameras. It accepts up to two LP-E17 batteries in its sliding tray, allowing you to effectively double the life of your camera for those long, draining shoots. With an extended length and a rubberized non-slip grip, the accessory also makes it easier to use your DSLR in portrait orientation and offers an alternate shutter release button so that you don't have to twist your arm to get the right shot.

  To install the grip, remove the battery compartment door completely and insert the power contacts into the empty battery slot. After that, simply rotate the locking wheel to tighten the mount and connect the included shutter release cable to both parts for proper use. The detached battery door can be kept in a dedicated slot on the grip so that you don't lose it, and a 1/4"-20 threaded mount can be found at the bottom to allow use with a tripod or monopod. Additionally, the BG-C15 is equipped with a built-in strap mount that makes it easy to attach an optional hand strap for safer operation.

  • Battery grip for vertical shooting, compatible with Canon EOS Rebel T7i and Canon EOS 77D cameras
  • Holds two LP-E17 batteries in a slide out tray to effectively double battery life
  • Built-in shutter release button allows for easy operation when shooting at portrait orientation
  • Tripod mount with 1/4"-20 thread found at the bottom of the grip, alongside a strap mounting slot
  • Dedicated space in the grip holds detached battery compartment door, which must be removed for installation
  • Non-slip grip made of rubberized material for enhanced handling

  UPC: 847628004986
• Vello LCD Screen Protector Ultra for Canon EOS 77D, T4i, T5i, T6i, T6s & T7i Camera

  This LCD Screen Protector Ultra from Vello is a sheet of ultra-thin (0.02") optical glass used to safeguard the LCD monitor of the Canon EOS 77D, Rebel T4i, T5i, T6i, T6s, and T7i cameras. It easily adheres to the screen via static, without trapping air bubbles, and if removed, won't leave a sticky residue behind. Multiple layers of protective material shield your display from dirt, scratches, sweat, smears, and light impact. The shatter-proof glass blocks UV rays while allowing visible light in. Additionally, the protector enables touchscreen operation. It can be easily cleaned using the supplied microfiber cloth and wet wipe.

  UPC: 847628561236
• Vello FreeWave Plus Wireless Remote Shutter Release for Canon

  Trigger your camera's shutter wirelessly with the FreeWave Plus Wireless Remote Shutter Release from Vello , a lightweight remote control system that will help you avoid unwanted camera movement. This 2.4 GHz model is compatible with Canon cameras and will work both wired and wirelessly up to 320', depending on your own needs and setup. This makes it useful for photographing wildlife or for macro and long exposures where it is necessary to eliminate any chance of camera shake.
  
  The FreeWave system also has access to 16 channels for triggering multiple receivers and has an internal antenna that will be protected from any accidental damage. Multiple features are available for shooting, such as a four-second delay as well as multi-exposure and long exposure modes. The device also has a dual function release, enabling focus on half press and triggering the shutter release on a full press. Additionally, it has LED indicators to confirm pre-focus and exposure while in wireless mode and the receiver and transmitter each run on two AAA batteries.

  Compatible Cameras

  Canon EOS: Digital Rebel (300D), XT (350D), XTi (400D), XSi (450D), T1i (500D), T2i (550D), T3 (1100D), T3i (600D), T4i (650D), T5 (1200D), T5i (700D), T6i (750D), T6s (760D), T7i (800D), SL1 (100D) and XS (1000D), 60D & 70D
  10D, 20D, 30D, 40D, 50D, 77D, 5D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 6D, 6D Mark II, 7D, 7D Mark II, 1D, 1D Mark II, 1D Mark II N, 1D Mark III, 1D Mark IV, 1Ds, 1Ds Mark II, 1Ds Mark III, 1D X and 1D C; Elan series
  PowerShot: G10, G11, G12, G15, G16, G1 X & G1 X Mark II, G3 X, G5 X, SX50 HS and SX60 HS
  Contax: N and 645
  Fujifilm: X-E2 and X-T1
  Hasselblad: H series
  Olympus: OM-D E-M1 Mark II
  Pentax: K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D
  Samsung: NX10 & NX100; GX-1S, GX-1L, GX-10 & GX-20
  Sigma: SD1, SD9, SD10, SD14 & SD15

  UPC: 847628029507
• Sensei Cap Keeper Plus Lens Cap Holder

  The Cap Keeper Plus Lens Cap Holder from Sensei prevents the loss of lens caps. An adhesive-backed disc secures the lens cap to the elastic leash which wraps around the lens barrel. With the lens cap removed from the lens while shooting, it hangs out of the way but secure and within reach for easy retrieval. The Cap Keeper Plus is made with tough and extremely secure elastic.

  UPC: 847628553064