Thermaltake Smart W3 700W 80 PLUS Power Supply (White)

Keep your rig up and running with the Smart W3 700W 80 PLUS Power Supply from Thermaltake. Featuring a standard ATX form factor and Intel ATX Version 3.1 compliance, this 700W, PSU utilizes a single +12V rail and 120mm cooling fan. Furthermore, it boasts an 80 PLUS efficiency rating and delivers 60% low-load efficiency. The Thermaltake Smart W3 700W 80 PLUS Power Supply has a mean time between failures (MTBF) of 100,000 hours, minimum.

The Smart W3 is fully compatible with Intel ATX 3.1 specifications which means it supports up to 200% power excursion, reaches 60% low load efficiency, and complies with required power supply timing standards.

Featuring a 120mm cooling fan optimized for quiet airflow, the Thermaltake Smart W3 700W PSU is designed to provide low noise levels.

A high-quality capacitor improves power supply durability, ensuring the Smart W3 is stable and reliable.

Powerful single +12V rail can properly deliver the power you need for the best compatibility.

The use of DC-to-DC circuit design provides very stable operation and enhanced voltage regulation.

To protect the hardware, the Smart W3 is built with industry-grade protections:

• OCP (Over Current Protection)
• OVP (Over Voltage Protection)
• UVP (Under Voltage Protection)
• OPP (Over Power Protection)
• SCP (Short Circuit Protection)
• OTP (Over Temperature Protection)

Soft black cables make installation easy while powering the system at optimal voltages. It features a main 24-pin connector, one 4+4-pin ATX 12V connector, two 6+2-pin connectors, four SATA 5-pin connectors, and four 4-pin peripheral connectors.

The Smart W3 series saves energy through its high energy efficiency up to 80% and is certified to 80 PLUS. It has been optimized to work with all generations of Intel's processors for maximum energy savings.

Thermaltake SMART W3 Specs

Total Connectors	1x 24-Pin ATX Motherboard 2x 4+4-Pin EPS CPU 2x 6+2-Pin PCIe 4x 15-Pin SATA 4x 4-Pin Peripheral / Molex
Cable Design	Modular
Total Wattage	700 W
Number of +12 V Rails	1
Efficiency Rating	80 PLUS
Form Factor	ATX

Total Connectors	1x 24-Pin ATX Motherboard 2x 4+4-Pin EPS CPU 2x 6+2-Pin PCIe 4x 15-Pin SATA 4x 4-Pin Peripheral / Molex
Cable Design	Modular
PCIe Connector Distances	19.7" / 500 mm 25.6" / 650 mm
SATA Connector Distances	19.7" / 500 mm 25.6" / 650 mm 31.5" / 800 mm 37.4" / 950 mm
Peripheral Connector Distances	19.7" / 500 mm 25.6" / 650 mm 31.5" / 800 mm 37.4" / 950 mm
ATX Connector Distance	23.6" / 600 mm
EPS Connector Distances	23.6" / 600 mm 29.5" / 750 mm

Total Wattage	700 W
Number of +12 V Rails	1
Combined Power for +12 V	700 W
Max Load for +12 V	58.3 A
Combined Power for +3.3/+5 V	110 W
Max Load for +3.3 V	18 A
Max Load for +5 V	16 A
Max Power for +5 Vsb	15 W
Max Load for +5 Vsb	3 A
Max Power for -12 V	3.6 W
Max Load for -12 V	0.3 A
Input Power	100 to 240 VAC, 50 / 60 Hz

Efficiency Rating	80 PLUS
Active Power Factor Correction	Yes

Fan Size	120 mm
Bearing Type	Fluid Dynamic Bearings (FDB)

Form Factor	ATX
Compliance	ATX v3.1
Protection	Over-Current Protection, Over-Power Protection, Over-Temperature Protection, Over-Voltage Protection, Short-Circuit Protection, Under-Voltage Protection
Certifications	CB, FCC, ICES, cTUVus
Operating Conditions	41 to 104°F / 5 to 40°C at 20 to 85% Humidity
Dimensions	5.9 x 5.5 x 3.4" / 150 x 140 x 86 mm