Product Overview
AHP series- T type air process heater for in-line air and gas heating. It is used to heat clean, dry air or gas for baking, drying, laminating, metal working, packaging, plastic welding, preheating, sealing, soldering, shrink fitting and synthetic fabric sewing. AHP series air process heater provide hot air and gas up to 1000°F (540°C) 9with infinite control by varying the voltage and/or the air flow. Closed loop control can also be achieved with temperature controllers (section P) and "T" fittings to mount thermocouples.
- Voltage rating is 120/240VAC
- 89mm heated length
- Maximum CFM is 8
- Diameter is 10mm
- 1/4inch NPT fitting
- Wattage is 50/200watt
- Pressure rating is 80PSIG
- 304.8mm long fiberglass insulated leads
Product details
| Duct Heater Type |
T Type Air and Gas Heater |
| Power Consumption |
200W |
| Outlet Air Temperature Max |
540°C |
| Heated Length - Imperial |
3.5" |
| Outer Diameter |
10mm |
| Outlet NPT |
0.25" |
| Phase Type |
- |
| Product Range |
AHP Series |
| Supply Voltage |
240VAC |
| Watt Density |
57W/in² |
| Flow Rate Max |
8CFM |
| Heated Length - Metric |
89mm |
| Inlet NPT |
0.25" |
| Sheath Material |
Stainless Steel |
| No. of Heating Elements |
- |
| SVHC |
No SVHC (04-Feb-2026) |
Other details
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.