| ₹ 965690.0 includes GST and import duties. | |
| B2B customers can avail ₹ 147267.73 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
- Supports Intel Xeon E5-2600 v4, v3 CPUs
- 16 x ECC DDR4 DIMM Slots Per Node
- 6 x 2.5" SATA III Bays Per Node
- 2 x 10 GbE, 1 x Ethernet IPMI
- Aspeed AST2400 BMC Graphics
- 2 x USB 3.0, 1 x VGA
- 3 x PCIe 3.0 x16, 2 x PCIe 3.0 x8 Slots
- Intel C612 Chipset, LGA 2011 R3 Socket
- 2000W Redundant Power Supplies
- 4RU Chassis
The Supermicro SuperServer FatTwin F628G2-FTPT+ Barebone NAS System offers four nodes that can each house Intel Xeon processors, ECC DDR4 memory chips, 2.5" storage drives, and more, so you can build four independent NAS systems. Each of the nodes has a Super X10DRFF-ITG motherboard, a 6-port FatTwin hot-swappable backplane, and a 2000W Titanium-rated power supply along with six 2.5" drive bays. For connectivity, one VGA and one IPMI Ethernet port as well as two 10 GbE and two USB 3.0 ports are available on each node.
The X10DRFF-ITG motherboard features an Intel C612 chipset as well as two LGA 2011 R3 sockets to accommodate up to two Intel Xeon E5-2600 v4/v3 processors. The motherboard comes with sixteen RDIMM slots that are compatible with 288-pin ECC DDR4 memory modules, which have capacities up to 128GB and speeds of up to 2400 MHz. For expansion, it is armed with three PCIe 3.0 x16 and two PCIe 3.0 x8 slots. Additionally, visuals are powered by an Aspeed AST2400 graphics chipset.
For drive support, the FatTwin backplane provides six SAS/SATA 6 Gb/s interfaces as well as hot-swap support, which lets you quickly install or replace a hard drive or SSD in each of the node's six drive bays. Aside from storage options, cooling all your internal components are accomplished via eight 80mm PWM fans. Moreover, the four nodes are housed in a 4RU chassis, which you can mount in a compatible rack cabinet.
| Processor | |
|---|---|
| Processor Support | 2 x Intel Xeon processor E5-2600 v4/v3 (up to 145 W TDP) Supports up to 22 cores and up to 55 MB of cache memory |
| Socket | Dual Socket R3 (LGA 2011) |
| Chipset | Intel C612 |
| System Bus | Up to 9.6 GT/s |
| Additional Support | 3 x Double-width GPU/Xeon Phi per node (total of 12x GPU/Xeon Phi cards in 4U) Supports Intel Xeon Phi Supports NVIDIA K1/K2/K10/K20M/K20X/K40M/K80 (only supports 2 per node), Xeon Phi 5110P, and Xeon Phi 3120P/7120P |
| System Memory | |
|---|---|
| DIMM Slots | 16 x 288-pin DDR4 DIMM slots (up to 2 TB of ECC 3DS LRDIMM or 1 TB of ECC RDIMM) |
| Memory Type | 2400, 2133, 1866, and 1600 MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 64 GB, 32 GB, 16 GB, 8 GB, 4 GB LRDIMM: 64 GB, 32 GB 3DS LRDIMM: 128 GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices | |
|---|---|
| SATA | AHCI SATA III (6 Gb/s) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Networking | Intel X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1 x Realtek RTL8211E PHY (dedicated IPMI) |
| Connectivity | |
|---|---|
| Ports | 6 x SATA 3.0 (6 Gb/s) 2 x RJ45 10 GBase-T 1 x RJ45 Dedicated IPMI 2 x USB 3.0 1 x VGA |
| Other Specifications | |
|---|---|
| Indicators and Controls | Power On/Off and UID buttons Power Status and UID LEDs |
| Expansion Slots | Per Node: 3 x PCIe 3.0 x16 (full-height, full-length, double-width) slots 2 x PCIe 3.0 x8 (low-profile) slots |
| Drive Bays | 6 x 2.5" Hot-swap SATA |
| Cooling | 8 x 80 mm 11K fans with air shroud and PWM fan speed control |
| BIOS | 128 Mb SPI Flash EEPROM with AMI BIOS Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI |
| Power | |
|---|---|
| Power Supply | 2000 W redundant with PMBus |
| Power Output | 1000 W/2000 W |
| Voltage Input | 100 to 127 VAC, 12 to 9.5 A, 50/60 Hz 200 to 220 VAC, 10 to 9.5 A, 50/60 Hz 220 to 230 VAC, 10 to 9.8 A, 50/60 Hz 230 to 240 VAC, 10 to 9.8 A, 50/60 Hz 200 to 240 VAC, 11.8 to 10 A, 50/60 Hz (UL/cUL only) |
| Voltage Rating | +12 V: Max: 83.3 A / Min: 0 A (100 to 127 VAC) Max: 150 A / Min: 0 A (200 to 220 VAC) Max: 165 A / Min: 0 A (220 to 230 VAC) Max: 166.7 A / Min: 0 A (230 to 240 VAC) Max: 166.7 A / Min: 0 A (200 to 240 VAC, UL/cUL only) +5 Vsb: Max: 1 A / Min: 0 A |
| Output Type | 27 Pairs Gold Finger Connector |
| Certification | UL/cUL/CB/BSMI/CE/CCC 80-PLUS Titanium |
| Environmental | |
|---|---|
| Operating Temperature | 50 to 95°F / 10 to 35°C |
| Storage Temperature | -40 to 158°F / -40 to 70°C |
| Operating Humidity | 8 to 90% |
| Storage Humidity | 5 to 95% |
| Green Compliance | RoHS |
| Physical | |
|---|---|
| Form Factor | 4RU |
| Dimensions (W x H x D) | 17.6 x 7 x 35" / 447 x 177.8 x 889 mm |
| Weight | 104.9 lb / 47.6 kg |
- Limited 3-Year Warranty for Labor
- Limited 1-Year Warranty for Parts
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 946376.2 |
| 3-5 | ₹ 936719.3 |
| 5-10 | ₹ 917405.5 |
| 10+ | ₹ 898091.7 |
Bulk discount will be automatically applied during checkout based on quantity.