SparkFun MIKROE Accel 24 Click

Accel 24 Click is a compact add-on board that contains an acceleration sensor. This board features the MXC6655XA, a 12-bit three-axis accelerometer from MEMSIC. It allows selectable full-scale acceleration measurements in ranges of ±2g, ±4g, or ±8g in three axes with a compatible I2C serial interface with 400kHz fast mode operation. Alongside low offset and temperature signal with high accuracy, the MXC6655XA also detects six orientation positions, X/Y shake, and shake directions with an appropriate interrupt signal for these states. This Click board� is suitable for a wide range of information appliances, consumer electronics, household safety applications, and many more.

Accel 24 Click, in based on the MXC6655XA, a highly reliable digital triaxial acceleration from MEMSIC. The MXC6655XA is highly configurable with a programmable acceleration range of ±2g, ±4g, or ±8g based on MEMSIC�s proprietary thermal technology built with a 0.18μm standard CMOS process. It contains no moving sensor parts, eliminating field reliability and repeatability issues; there is no measurable resonance (immunity to vibration), no stiction, and no detectable hysteresis.

The MXC6655XA also eliminates the "click" sounds typically heard in ball-based orientation sensors. The MEMS structure is greater than 200,000g. This sensor provides X/Y/Z axis acceleration signals with a low 0g offset and temperature signals with high accuracy. In addition, it also detects six orientation positions, X/Y shake, and shakes directions.

Accel 24 Click communicates with an MCU using the standard I2C 2-Wire interface to read data and configure settings capable of operating in a standard or fast mode of operation. The acceleration signal is provided in 12-bit output resolution. In addition to communication pins, this board also possesses an additional interrupt pin, routed to the INT pin on the mikroBUS� socket, for orientation and X/Y shake detections. The MXC6655XA allows users to be placed in a Power-Down mode enabled through the I2C interface.

This Click board� can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board� comes equipped with a library containing functions and an example code that can be used, as a reference, for further development.

Features:

• Interface: I²C
• Compatibility: mikroBUSâ�¢
• Dimensions: 28.6 x 25.4mm
• Input Voltage: 3.3V
• Supply Voltage: 3.3V
• Acceleration Range: Min. ±2g, Max. ±8g
• Acceleration Resolution: 12 bits
• Sensitivity (±2 ~ ±8): Min. 256 LSB/g, Max. 1024 LSB/g
• Operating Temperature Range: Min. -40°C, Typ. +25°C, Max. +85°C

Documents:

• Schematic
• MXC6655XA Datasheet
• mikroSDK
• LibStock