- Back Electret Condenser Transducer
- 3 Capsules Included
- 70 Hz to 18 kHz Frequency Response
- XLR Connector
- 48V Phantom Powered
- Urethane Wind Screen is Included
- Vinyl Case is Included
The matte black CSR-2 Rear Rejection Shotgun Microphone from Sanken is used to capture audio in critical applications such as TV, film sound and more. This microphone features a back electret condenser with 3 capsules. It combines the long acoustic tube and rectangular capsule design of the Sanken CS-2 with the mid and low frequency side and rear rejection of the Sanken CS-3e. A switch allows you to turn off the mid and low frequency side and rear rejection capsule to obtain a wider and warmer sound image. The frequency range is 70 to 18kHz.
The CSR-2 is built with an XLR connector and is powered by +48V phantom power. Measuring about 10 inches in length and weighing 6 ounces this mic is a candidate for camera or boom pole mounting scenarios. A urethane wind screen and vinyl case is included.
- Mid and High Frequency Capsule
- Provides a long reach for the mid and high frequencies and allows for capture of clear dialog
- Side and Rear Capsules
- A switch provides an option for mid and low frequency side and rear rejection capsules allowing them to be turned on or off
- Convenient Size
- Measuring about 10 inches, the CSR-2 can be used for both camera or boom pole mounting applications
In the Box
Sanken CSR-2 Rear Rejection Shotgun Microphone (Matte Black)
- WM-R2 Urethane Wind Screen
- Vinyl Case
- Limited 1-Year Warranty
| Transducer | Electret Condenser |
| Polar Pattern | Lobar |
| Frequency Range | 70�Hz to 18�kHz |
| Equivalent Noise Level | 16 dB� |
| Maximum SPL | 123 dB SPL |
| Impedance | 150�ohms% @1�kHz |
| Sensitivity | 71�mV/PA, re: 1 V/Pa |
| Power Requirements | 48 V+/- 4 V |
| Output Connectors | 3-Pin XLR |
| Operating Current Consumption | 4.5mA |
| General |
| Length | 9.84" (250 mm) |
| Diameter | 0.87" (22 mm) |
| Weight | 6.00 oz (170 g) |
| Packaging Info |
| Package Weight | 1.25 lb |
| Box Dimensions (LxWxH) | 10.6 x 4.4 x 3.1" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
