Rode VideoMic Studio Boom Kit

The Rode VideoMic Studio Boom Kit from B &H includes the Rode VideoMic shotgun microphone with a Rycote Lyre suspension system, a foam windscreen, an Auray MS-5230T tripod microphone stand with telescoping boom, a Pearstone 25' 1/8" stereo mini-jack male to 1/8" stereo mini-jack female extension cable, and a WindTech M-12 microphone stand thread adapter. This kit can be used to capture audio for DSLR cameras in video and ENG applications.

• Rode VideoMic with Rycote Lyre Suspension System

  The VideoMic with Rycote Lyre Suspension System from Rode is a shotgun microphone that can easily be mounted on a DSLR camera. It features a Rycote suspension system that attaches to the camera's shoe. The VideoMic is lightweight, and when mounted on a camera it does not appear in the frame. The VideoMic can also mount to Rode's boompoles for elevated audio capture. Its supercardioid polar pattern attenuates sounds from the sides. The result is a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances.
  
  The included Rycote Lyre is a non-elasticated suspension structure composed of a hard-wearing thermoplastic. It is more effective at acoustically decoupling microphones from unwanted vibrations, handling and cable-borne noise than elasticated suspensions. The lyre remains effective at a wide range of temperatures and is virtually indestructible. It will never wear out, sag, snap or require any rethreading to maintain its effectiveness.
  
  An attached, coiled cable terminates to a 1/8" (3.5mm) mini output connection. The VideoMic features a condenser element that utilizes a standard 9V battery (sold separately). The microphone will run for approximately 100 hours on a single battery.

  Barrel-Canceling Pickup

  The Rode Video Mic functions as a true line+gradient microphone with a supercardioid pattern in the front and a barrel that cancels side audio. The result is maximum pickup of the source in highly ambient and noisy environments.

  Selectable 10 or 20 dB Pad

  When capturing audio in loud environments, the VideoMic offers built-in attenuation. The selectable 10 or 20 dB pad lessens the microphone's sensitivity, allowing it to handle higher SPL levels without sacrificing clarity.

  High-Pass Filter Switch

  A high-pass filter switch eliminates room ambiance and noise below 80 Hz. This results in improved intelligibility while recording around machinery, wind or close proximities.

  Internal Power

  The condenser element is powered with a standard 9V battery for up to 100 hours (approximately).

  UPC: 698813002900
• Auray MS-5230T Tripod Microphone Stand with Telescoping Boom

  The Auray MS-5230T Tripod Microphone Stand with Telescoping Boom features durable, steel construction. The telescoping boom arm is adjustable from 19.3 to 33.9" in length, allowing you to angle and extend the mic placement however you need it. An ergonomic twist-action clutch helps adjust the height of the stand, while the reinforced tripod base and non-slip feet keep it firmly and sturdily in place. The Auray MS-5230T mic stand collapses for easy transport.

  UPC: 847628015593
• Pearstone Stereo Mini Male to Stereo Mini Female Extension Cable (Black) - 25'

  The 25' black Stereo Mini Male to Stereo Mini Female Extension Cable from Pearstone is a general purpose extension cable with a mini (3.5mm) male plug at one end and a female jack at the other end. It allows you to extend the distance between your smartphone, tablet, laptop or other audio device, and your headphones or speakers.

  UPC: 847628562165
• Auray AD-5838-B 5/8"-27 Female to 3/8"-16 Male Mic Stand Adapter

  Designed to add extra versatility and connectivity to any mic stand, the AD-5838-B from Auray is an adapter which converts a 5/8"-27 female mount to a 3/8"-16 male post. As such, it's compatible with a wide array of mic clips, shockmounts, or any other applicable accessory sporting a 3/8"-16 post.

  The adapter features a sturdy knurled edge, which aids in loosening and tightening the adapter as needed. Using this adapter will allow your 5/8"-27 mic-stand stud to interface with shockmounts usually intended for use with boom poles, as well as European mic clips and other gear outfitted with 3/8"-16 mounts.

  5/8"-27 to 3/8"-16 Adapter

  This adapter lets you mount accessories such as shockmounts and mic clips, usually sporting 3/8"-16 mounts, to a standard 5/8"-27 mic-stand stud.

  Adds Connection Possibilities to Mic Stands

  The adapter lets you use shockmounts usually designed for boom-pole operation on a mic stand. It's also compatible with European mic clips, as well as shockmounts with 3/8"-16 threaded receivers.

  UPC: 847628002487