Proaim Widebase Autopan Camera Slider Overview
Create a variety of automatic pans as you move your camera along the slider to boost your production value and expand your creativity with this 4' long Proaim Widebase Autopan 2-Axis Slider. The slider track is made from a single piece of aluminum, allowing it to be extremely lightweight but also rigid, able to support up to 22 lb. The slider carriage features smooth gliding oil-filled bearings that help smoothen and feather starts and stops.
The track's adjustable legs enable you to adjust the height of the track on each end from 3.7 to 4.1", for leveling when placed on an uneven surface. You can also mount the slider track on tripods and light stands using the 1/4"-20 and 3/8"-16 mounting holes. Four roller bearings on the carriage allow for smooth gliding on the outer rails.
You can use the Widebase Autopan as a standard slider to create a straight side-to-side shot or adjust the center guide bar with the tuning knobs, and the auto-pan feature will turn your camera to create either panoramic or parallax shots as you slide.
The auto-pan carriage features index marks for repeatability, and it allows the camera to pan while sliding
You can slide with three panning effects:
- Straight: Without any panning effect
- Parallax: Pans the camera around a center point as you slide your camera
- Panoramic: Pans the lens so that it pans in an outward arc
The guide rail that creates the panning effect has index marks and fine adjustment knobs, allowing you to create precise panning movements
The slider has a 3.6' travel range
The rubber feet provide a firm grip and the legs feature .4" of adjustment to allow you to level the slider on uneven terrain
The carriage has a built-in bubble level to keep your shots balanced on uneven terrain
UPC: 703791620012
In the Box
- Proaim Widebase Autopan 2-Axis Slider (4')
- 1/4"-20 to 3/8"-16 Adapter Bushing
- Carry Bag
- Limited 1-Year Warranty
Proaim Widebase Autopan Camera Slider Specs
Performance
Sliding System |
Roller Bearing Sliding System |
Load Capacity |
22 lb / 10.0 kg |
Travel Distance |
3.6' / 1.1 m |
Bubble Level |
Yes |
Mounting
Tripod Mounting |
1/4"-20 Female Thread 3/8"-16 Female Thread |
Carriage
Camera Mounting Screw |
1/4"-20 Male & 3/8"-16 with Bushing |
Quick Release Plate Type |
No Quick Release |
Physical
Body Material |
Aluminum |
Track Length |
4' / 1.2 m |
Track Width |
5.1" / 130 mm |
Leg Height Adjustment |
3.7 to 4.1" / 95 to 105 mm |
Weight |
8.92 lb / 4.05 kg |
Packaging Info
Package Weight |
14.12 lb |
Box Dimensions (LxWxH) |
52.75 x 11 x 5" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.