30.9 lb Capacity CX14 Fluid HeadSprinter II Carbon Fiber Tripod23.7 to 66.6" Height RangeSet of Three Rubber Feet The Miller CX14 Sprinter II 2-Stage Carbon Fiber Tripod System with Rubber Feet and Mid-Level Spreader includes a CX14 fluid head with pan handle, a Sprinter II 100mm 2-stage carbon fiber tripod, a mid-level spreader, a set of three rubber feet, and an Arrowx two-stage soft case. The CX14 fluid head supports up to 30.9 pounds and employs CB Plus technology, providing 15+0 positions of counterbalance and 5+0 levels of pan and tilt settings with 2.4" of camera plate travel.
The head is matched with the 2-stage Sprinter II aluminum alloy tripod and together, the system has a height range of 23.7 to 66.6". The included mid-level spreader is well suited for use when working on uneven terrain, while the included rubber boots cover the tripod legs spikes to protect delicate floors and provide grip on hard or slick surfaces. The soft case has removable back pack straps that allow you to carry the system without occupying your hands.
Miller CX14 Fluid Head
The Miller CX14 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. The head has a tilt range of +90 to -75°, which allows you to tilt the camera straight down, then nearly straight up. Pan, tilt, and counterbalance can all be set to zero, for totally free movement of the head, often useful for whip pans. The fluid head accommodates cameras and rigs weighing up to 30.9 pounds, more than adequate for use with small cinema cameras with rigs or medium sized ENG camcorders. The sideload plate design enables you to simply drop in your camera from the top without the alignment issues posed by rear-loading variations. The plate offers 2.4" of sliding range to balance your rig.
The CX14 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball-bearings for smooth mechanical operation. Even in harsh conditions, the CX14 will perform reliably. The base of the CX14 is a removable 100mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CX14 in dark environments. A fixed length pan handle is included, and an integrated second rosette is available for attaching an optional second pan handle.
With the head mounted level in your tripod legs (not included), you can tilt your camera straight down, and without adjusting the tripod tilt up to nearly straight up and down The counterbalance settings enable you to tweak the head to neutralize the weight of the camera, so it stays in whatever tilt position you put it in without having to fight against gravity trying to tilt the camera forward or back, or fight against a spring trying to push the camera to level The pan and tilt axes feature independent locks and drag adjustment The 100mm ball base provides a wide platform making it easier to balance your camera on the head within the footprint of the head for more stable pan and tilt The 100mm bowl base is removable, revealing a flat base with a 3/8"-16 threaded hole, well suited for sliders and other flat base applications Threaded holes on both sides of the heads pan base enable mounting accessory blocks to the head The unused rosette has a removable cover for protection Extra camera tie-down screws mount in the top of the camera platform, making them easily available. Miller Sprinter II 2-Stage Carbon Fiber Tripod (Mid-Level Spreader Ready)
The Miller Sprinter II 2-Stage Carbon Fiber Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. Unlike many traditional multi-stage designs, both flip-locks are located on the same section for easy reaching, no matter the height setting. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.
Miller 993 Mid-level Spreader
The Miller 993 is a mid-level spreader for Sprinter, Arrow 25/40 and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings and a latch and swivel design.
Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)
The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.
Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)
Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems . The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.
| Camera Plate Features | Sideload, Sliding Balance Plate |
| Camera Plate Type | Euro Plate, Miller 1205, Sideload Plate |
| Camera Mounting Screw | 1 x 1/4"-20 Male
1 x 3/8"-16 Male |
| Balance Plate Sliding Range | 2.4" / 6 cm |
| Plate Dimensions | 4.72 x 1.91 x 0.31" / 120 x 48.5 x 8 mm |
| Camera Platform Adjustment | No |
| Base Mount | 100 mm Half Ball |
| Drag Control | Pan: 5-Step Plus 0
Tilt: 5-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Material | Aluminum |
| Load Capacity | 0 to 26.4 lb / 0 to 12 kg |
| Counter Balance | Incremental 15-Step Plus 0 |
| Pan Handle Fittings | 2 x Rosette |
| Included Pan Handle Length | 15.35" / 390 mm |
| Bubble Level | 1 x Illuminated |
| Base Diameter | 3.94" / 100 mm |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Weight | 5.51 lb / 2.5 kg |
| Package Weight | 8.545 lb |
| Box Dimensions (LxWxH) | 14 x 12.3 x 10.5" |
| Head Mount Type | 100 mm Bowl |
| Load Capacity | 100 lb / 45 kg |
| Maximum Working Height | 60.4" / 153 cm |
| Minimum Working Height | 17.3" / 44 cm |
| Folded Length | 27.6" / 70 cm |
| Materials | Carbon Fiber |
| Weight | 7 lb / 3.2 kg |
| Package Weight | 13.5 lb |
| Box Dimensions (LxWxH) | 37.5 x 12.8 x 10.9" |
| Construction | Alloy |
| Type | Mid-Level |
| Adjustable | Continuously variable through all height settings |
| Minimum Length | 12.4" (315mm) |
| Maximum Length | 20.3" (515mm) |
| Weight | 1.7 lbs (0.75kg) |
| Package Weight | 2.385 lb |
| Box Dimensions (LxWxH) | 18.35 x 6.55 x 6.4" |
| Dimensions | L: 3.7" / L: 95 mm |
| Weight | 8 oz / 210 g |
| Package Weight | 0.65 lb |
| Box Dimensions (LxWxH) | 7.35 x 5.85 x 5.2" |
| Material | Ballistic nylon outer shell |
| Type of Closure | Zipper |
| Padded | Yes |
| Carrying/Transport Options | Dual top handles and padded end handle
D-links for optional, user-supplied shoulder strap
Back pack straps |
| Dimensions | 37.8 x 10.2 x 12.6" / 96.0 x 26.0 x 32.0 cm |
| Weight | 9.7 lb / 4.4 kg |
| Package Weight | 12.68 lb |
| Box Dimensions (LxWxH) | 39 x 13.75 x 12" |
In the Box
- Miller CX14 Fluid Head
- Miller Standard Camera Plate for AIR, DS10, DS20, Compass, CompassX Heads (2.4")
- 1/4"-20 Camera Tie-Down Screw
- 3/8"-16 Camera Tie-Down Screw
- Pan Handle
- Limited 3-Year Warranty
- Miller Sprinter II 2-Stage Carbon Fiber Tripod (Mid-Level Spreader Ready)
- Miller 993 Mid-level Spreader
- Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)
- Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)
- Back Pack Straps
- Limited 3-Year Warranty
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
