Miller AIR Toggle LW Alloy System

The Miller AIR Toggle LW Alloy System includes the AIR Fluid Head, DS Aluminum 1-Stage Lightweight Tripod Legs, Non-Adjustable Above-Ground Tripod Spreader, Rubber Feet for Select Tripods (set of three), and Soft Tripod Case for DS 1-Stage Systems.

The AIR Fluid Head is constructed of lightweight high-strength die cast alloy and rigid composite polymers, incorporating advanced precision fluid drag and two positions of counterbalance. It is capable of handling a wide range of payloads, from 4.4 to 11 lb. The DS Aluminum 1-Stage Lightweight Tripod is designed with single or two-stage legs, and made of aluminum alloy or carbon fiber material. It offers a 75 or 100mm bowl fixing, attached to a ball-leveling mount that ensures bowl-to-leg fastening, resists loosening, and eliminates joint instability. A Non-Adjustable Above-Ground Tripod Spreader is essential when shooting on uneven surfaces, such as steps, rocky ground, and slopes. It allows for rapid setups, and it pulls down by keeping tripod legs at an equal or preset distance relative to each other. The set of three Rubber Feet snap onto your tripod's spiked feet, providing stable, non-slip support. And the Soft Tripod Case is padded and designed for the Miller DS single stage tripod systems.

• Air Fluid Head

  The Air Fluid Head from Miller is constructed of light weight hi-strength die-cast alloy and rigid composite polymers, incorporating advanced precision fluid drag and two positions of counterbalance, with the ability to handle a wide range of payloads from 4.4 to 11 lb. The fluid drag system employs smooth start and soft stop technology, well balanced diagonal drag transitions and consistent drag resistance over temperatures ranging from -40 to 149�F.

  Miller fluid head pan and tilt technology

  Suitable for payloads between 4.4 to 11 lb

  Built for rugged outdoor shooting conditions

  Removable stud allowing head to be mounted on a solopod and slider via a 3/8" thread

  Optional second pan handle mount

  Compatibility

  Solo Strap (1520), Solo 75 2-Stage Alloy Tripod (1630), Solo Dolly (394), Air Accessory Mounting Block (2092), Fixed Length Pan Handle for Air Fluid Heads (682)

• DS Aluminum 1-Stage Tripod Legs (75mm Bowl)

  DS Series tripods are designed with single or two-stage legs, and made of aluminum alloy or carbon fiber material. Offers a 75 or 100mm bowl fixing, attached to a ball-leveling mount that ensures bowl-to-leg fastening, resists loosening and eliminates joint instability. With unrivalled height range capability and toggle leg clamping system, these lightweight, compact tripods are quick and easy to set up and provide optimum torsional rigidity for stable shooting under any condition.

  Aluminum alloy construction

  75mm / 3" bowl base

  Single extension design

  Toggle clamping system

  Maximum height of 52.0-inch

  Supports up to 30 lb

• 835 Non-Adjustable Above-Ground Tripod Spreader

  A Mid-Level Spreader is chosen when shooting is often performed on uneven surfaces, such as steps, rocky ground, slopes. It allows for rapid set-up and pull down by keeping tripod legs at an equal or preset distance relative to each other. Attaches to the center bracket of a tripod and folds down within tripod without having to take it off.

  Speedy set-up for all lightweight tripods

  Quick release attachment pins

  Integrated in DS5 and DS10 systems with lightweight tripods

• 550 Rubber Feet Pads for Select Tripods (Set of 3)

  The 550 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods featuring 835 and 508 above ground spreaders.

• 874 Soft Tripod Case

  The Miller 874 Soft Tripod Case is a padded tripod carry case designed for the Miller DS single stage tripod systems. It has rigid sidewalls sandwiched between high density foam padding and a head-end cradle to protect the tripod and fluid head from heavy bumps during flight and vehicle transport. It has a weatherproof Cordura construction with heavy duty zippers on the bag and the interior pocket. The case is carried by either the padded interlocking carry straps or the padded shoulder strap.

  1000 denier water-resistant Cordura fabric

  Rigid sidewalls sandwiched between high density EVA foam padding

  Head-end cradle protects fluid head from heavy bumps during flight and vehicle transport

  Padded interlocking carry straps and padded shoulder strap

  1 Interior accessory pocket

  Heavy duty zippers on bag and pocket

  ID window

  Compatible with;

  • Miller DS single stage system tripod

• Limited 3-Year Warranty

• Carrying Strap

• 3-Year Parts and Labor Warranty

• Limited 3-Year Warranty

• Padded shoulder strap

• 3 year warranty