Inovativ AXIS Base Station and Studio Bundle

Mount AXIS vDrop workstation accessories and other grip equipment onto the AXIS Stand from Inovativ. This anodized aluminum grip stand features three sections that extend to a maximum 79" tall, and it collapses down to 50.5" when folded. Its dual-reinforced legs provide a solid base to keep from tipping.

The three-section stand is compatible with the separately available heavy-duty 8" caster wheel system that will allow you to transport the stand smoothly across the floor, features foot brakes, and has a footprint of 37.7 x 46.4". Each stand section is secured with a locking knob and the top section features a Junior pin.

Keep your AXIS Grip stand rolling smooth even over rough ground or electrical cords with the AXIS 8" Wheel Set from Inovativ. The wheel set includes three heavy-duty swivel wheels with footbrakes that mount onto 1" square AXIS grip stand legs.

The wheels are constructed with a durable aluminum and each wheel weighs approximately 6.5 lb. When attached to stand legs, the wheels create a footprint of 37.8 x 46.4". Each wheel is secured to the stand leg with a locking lever, and footbrakes allow you to secure the stand in-place. Each wheel can be stored in its own included nylon bag, and all the hardware required for attaching the wheels to the stand is included.

Use this AXIS Weight Hanger with 25 lb Weight Bag from Inovativ to keep your AXIS grip stand stable. The hanger mounts onto the 1" leg of your AXIS or American grip stand and secures with a locking lever. It provides a place to hang the included 25 lb AXIS weight bag or other type of weighted bag for stability.

Add a workstation platform to your AXIS Stand or grip stand with this WorkSurface Pro Platform from Inovativ. The platform attaches to any stand or workstation with a 2" diameter using its Inovativ vDrop mount. It features two handles on the sides to raise, lower, or rotate the platform.

The platform can rotate around the stand 360°, and it can be raised to a maximum height of 43" and lowered to a minimum height of 34" while mounted on the stand. The top surface of the WorkSurface Pro is lined with a soft carpet to prevent any scuffing of your gear. It also features a cable management hole to pass cables from your equipment through, such as a keyboard or mouse.

Two mafer clamps are included to mount the platform onto other surfaces and to secure additional accessories. The WorkSurface Pro platform is compatible with the separately available Top Drawer with a three-digit combination lock to secure your gear inside.

The INOVATIV Pro Monitor Mount mounts on industry standard 5/8" (Baby) pins and supports monitors with a 100 x 100 VESA mounting pattern. The sturdy mount is made from 6061 aluminum and stainless steel components and is anodized black and orange. The design of the mount allows you to freely rotate the monitor and lock it in either horizontal or vertical orientation. The mount also features a lockable-tilt axis.

Compatible with the AXIS Stand, this powder-coated black AXIS Trough from Inovativ offers convenient storage for tools, adapters, batteries, and accessories. It quickly installs between the legs of your AXIS Stand and is secured with locking knobs.

The Trough features durable aluminum construction with a powder-coated finish, and it includes a soft carpet lining to prevent noise and scratching of your gear.

Add the AXIS Top Drawer to the Inovativ WorkSurface Pro workstation to add lockable storage to your grip rig. This bottom drawer features rails on the sides that slide into the WorkSurface Pro, creating a drawer beneath the top surface.

The drawer features a lock that can be secured and unlocked with a three-digit code. The interior is lined with a soft carpeting and it has a pass-through hole for cable management.

Incorporate this Cable Management Post Clamp Kit onto your compatible Inovativ AXIS monitor stand and streamline your cable runs. The three clamps have diameters compatible with each stage of the stand system, from 1.4" to 1.6" to 1.8". Each clamp features an open channel that can accommodate multiple cables, keeping your cable runs flush. Their aluminum design can be installed without the need for tools.

The Inovativ QR VESA System allows you to attach a monitor to a VESA mount by quick release and to just as easily remove it. It was designed to let you quickly move a monitor between different VESA mounts on set, or to easily remove your monitor to transport it to another location. Monitors are normally screwed into a VESA mount, and the QR VESA System provides a quick release solution.

The system includes a monitor plate that attaches to your monitor's VESA mount, and a receiver plate that attaches to the VESA mount you want to attach the monitor to, such as the Inovativ Pro Monitor Mount that's used on production carts. Both plates feature Inovativ's interlocking vDrop quick release dovetail mount, and they attach to each other via this mount and secure tightly with a turn of the knob on the side. A spacer plate is also included that may be necessary for certain monitors with recessed mounting areas. All three plates are compact, and the system is compatible with 100 x 100 and 75 x 75 VESA standards.

The QR VESA System provides a universal solution that allows for efficiency and flexibility in virtually any environment, including the home office.