FREEFLY MoVI Pro Overview
-
1Description
-
2FREEFLY M?VI Pro (Gimbal Only)
-
3FREEFLY M?VI Ring Pro II
-
4FREEFLY MoVI Pro Landing Gear Kit
-
5FREEFLY SL4-Ground Lithium-Ion Battery for M?VI Pro and Carbon
-
6FREEFLY SL Battery Charger
By Photo's
Jordan Gallant
FREEFLY M?VI Pro (Gimbal Only)
At the heart of
FREEFLY's
M?VI Pro system is the gimbal unit. Using the "Toad in the Hole" quick release system, this gimbal can be attached to handles, aerial platforms, or terrestrial vehicles for stable, professional shots. The M?VI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 lb, rendering it compatible with mirrorless all the way up to smaller cinema cameras. With separately available battery options, the camera and essential accessories can be powered without adding any bulk to the M?VI Pro via its D-Tap output port.
Versatile "Toad in the Hole" Design
The M?VI Pro is capable of turning 180° to quickly transition from upright to inverted mounting modes and transition from handheld to TERO-mounted configurations. Handle configuration options include the RING Pro, skate, and classic modes. Mount the gimbal onto a drone and use the dual GPS units on the top and bottom for solid signal in both Sky or GroundView.
Built into the camera stage is a fully integrated lens control system. Use the internal, long-range 2.4 GHz frequency hopping signal to connect to the separately available MIMIC, M?vi controller, or a combination of the two.
Access RED camera controls like focus, iris, ISO, and start/stop thanks to the integrated RCP2 control. Use the M?vi or MIMIC controller to adjust those settings from hundreds of feet away.
- Gives the user quick access to important information
- Tune/adjust parameters on the fly without a phone or computer
- Enter majestic angle or time-lapse mode
- Pan, tilt, roll balancing, and stiffness
- Full stiffness and filter auto-tune in approximately 10 seconds
Improved Stability, Increased Torque
High-quality sensors with precise calibration allow for smooth performance even during the most demanding shots with a 60 dB at 1 Hz disturbance rejection. The Pro features twice the torque of previous gimbal motors thanks to its direct-drive brushless motors.
Power Capabilities and Compatibility
- The dual battery plates are hot-swappable for easy replacement while shooting in the field. They are compatible with separately available M?vi Pro, SL4-Ground, and TB50/55 batteries.
- Three D-Tap outputs and one USB output on the gimbal provide the camera and any attached accessories with power.
Tune and customize your gimbal in real time using the iOS and Android compatible M?vi Pro App. Configure your time-lapse settings and monitor battery status all from your phone, which is especially useful when your gimbal is mounted on the TERO vehicle or a high-powered drone.
For a full list of compatible cameras, please see the most current compatibility information on
the FREEFLY website.
Do even more with your M?VI Pro by pairing it with the M?VI Ring Pro from FREEFLY. Adaptable and versatile, the M?VI Ring Pro is a carbon fiber ring to which the gimbal attaches, serving both as a stand and a handgrip by which to hold the system. Built-in feet allow for instant set down so you can rest between takes. Also, the M?VI Ring Pro enables you to set up and balance your M?VI Pro on a flat surface to execute complex pan/tilt shots remotely.
1.2"-diameter carbon fiber ring
Adjustable and removable handstops
Fiber-reinforced molded plastic feet
Compatible with M?VI Pro, M?VI Carbon, and M-series M?VI stabilizers
FREEFLY MoVI Pro Landing Gear Kit
Take your MoVI Pro setup to new heights with the MoVI Pro Landing Gear Kit from FREEFLY. This kit is designed to attach to your MoVI Pro stabilizer in roughly 5 minutes, giving it lightweight carbon and aluminum landing gear that can be used with the FREEFLY ALTA 6 or ALTA 8 multi-rotor UAV.
Once installed onto an ALTA drone, the entire landing gear structure will rotate along with the gimbal for an unrestricted panning field of view. The quick release feature for the 0.6" diameter legs lets you quickly transition from aerial shooting to ground/handheld shooting.
FREEFLY SL4-Ground Lithium-Ion Battery for M?VI Pro and Carbon
Power your M?VI Pro or Carbon gimbal stabilizer with this SL4-Ground Lithium-Ion Battery from FREEFLY. The battery features a rechargeable 86.4Wh lithium-ion design with a 21.6V nominal voltage. Depending on the camera and accessories you utilize with the rig, it has a total runtime of 2 to 5.75 hours and can recharge in just 70 minutes. The front panel of the battery features a USB-C and proprietary ports for recharging or power additional devices, as well as a display for monitoring the battery's status.
FREEFLY M?VI Pro
FREEFLY M?VI Carbon
FREEFLY SL Battery Charger
Charge your SL4-Gound or SL8-Air battery, personal computer, or mobile device with this SL Battery Charger from FREEFLY. The charger features a USB-C port which doubles as both an input and output to supply power to your compatible battery or charge a personal device with a connected battery. A proprietary port connects to your SL4 or SL8 battery and can fully recharge either in 70 minutes or 2.5 hours. The charger has an input range of 9 to 20V and includes a USB-C cable for connection to a separately available wall adapter.
FREEFLY SL4-Ground batteries
FREEFLY SL8-Air batteries
In the Box
- FREEFLY M?VI Pro (Gimbal Only)
- FREEFLY Adjustable Camera Plate with Screws for M?VI Pro Stabilizer System
- FREEFLY Adjustable Top Camera Plate for MoVI M5 Stabilizer
- FREEFLY M?VI Pro COM to M?VI Controller Receiver Cable (11.8")
- FREEFLY MoVI Rod Mount Adapter
- Assembly Tools
- Limited 1-Year Manufacturer Warranty
- FREEFLY M?VI Ring Pro II
- Top Handle
- Handstops
- Limited 1-Year Manufacturer Warranty
- FREEFLY MoVI Pro Landing Gear Kit
- 2 x FREEFLY SL4-Ground Lithium-Ion Battery for M?VI Pro and Carbon
- Limited 1-Year Manufacturer Warranty
- 2 x FREEFLY SL Battery Charger
- USB-C Cable (6.6')
- Limited 1-Year Manufacturer Warranty
- M?VI Pro to SL Battery Adapter (Pair)
Table of Contents
- Description
- FREEFLY M?VI Pro (Gimbal Only)
- FREEFLY M?VI Ring Pro II
- FREEFLY MoVI Pro Landing Gear Kit
- FREEFLY SL4-Ground Lithium-Ion Battery for M?VI Pro and Carbon
- FREEFLY SL Battery Charger
FREEFLY M?VI Pro (Gimbal Only) Specs
| Grip Design |
Single Handgrip |
Gimbal
| Load Capacity |
15 lb / 6.8 kg |
| Number of Axes |
3-Axis (Pitch (Tilt), Roll, Yaw (Pan)) |
Compatibility
| Camera Control |
On Compatible Models |
Connectivity
| Inputs/Outputs |
1 x D-Tap (12 VDC Power) Input
2 x D-Tap (12 VDC Power) Output |
| Wireless Protocol |
Wi-Fi (Unspecified Type) |
General
| Display Type |
None |
| Dimensions |
7.7 x 7.9 x 6.9" / 19.6 x 20 x 17.5 cm |
| Weight |
6.0 lb / 2.7 kg |
Packaging Info
| Package Weight |
10.175 lb |
| Box Dimensions (LxWxH) |
22.5 x 18.5 x 9.1" |
FREEFLY M?VI Ring Pro II Specs
| Compatibility |
MoVI Pro, Carbon, and M-Series Stabilizers |
| Material |
Ring: Carbon Fiber
Feet: Fiber-Reinforced Molded Plastic |
| Carry Handle |
Removable Top Handle |
| Ring Diameter |
1.2" / 30 mm |
| Dimensions |
Not Specified by Manufacturer |
| Weight |
1.8 lb / 0.8 kg |
Packaging Info
| Package Weight |
4.63 lb |
| Box Dimensions (LxWxH) |
25.8 x 24.2 x 3.6" |
FREEFLY MoVI Pro Landing Gear Kit Specs
| Leg Diameter |
0.6" / 1.5 cm |
| Weight |
8.0 oz / 226.8 g |
Packaging Info
| Package Weight |
1.4 lb |
| Box Dimensions (LxWxH) |
22.1 x 7.5 x 3.4" |
FREEFLY SL4-Ground Lithium-Ion Battery for M?VI Pro and Carbon Specs
General
| Compatibility |
FREEFLY M?VI Pro
FREEFLY M?VI Carbon |
Battery
| Battery Chemistry |
Lithium-Ion |
| Battery Capacity |
86.4 Wh |
| Output Voltage |
21.6 VDC |
| Recharge Time |
70 Minutes |
Environmental
| Operating Temperature |
-4 to 122°F / -20 to 50°C |
| Charging Temperature |
32 to 122°F / 0 to 50°C |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
