FLOWCINE Serene Stabilizer Kit with Extension Arm for Easyrig

2-Axis Spring Arm to Extend Easyrig Arm

2.2 to 4.5" Extension Arm

Smooths Vertical & Horizontal Vibrations

Maintains Easyrig Functionality

The Serene sneak peek 02 - a quick walk and run test. Tests with Freefly Mövi and the Easyrig/Serene combo

Add an extension to your Easyrig stabilization arm with this Flowcine Serene Stabilizer Kit with Extension Arm put together by B&H . The kit includes the Serene two-axis spring arm and a 2.2 to 4.5" extension arm.

The Serene arm attaches to the end of the Easyrig 2, 2.5, 3, or Vario 5 stabilizer arm, and produces smooth video movement by counter-pivoting and weight-shifting. The extension arm adds a boom to the Serene, and it extends out in small increments from 2.2 to 4.5". The Serene supports rigs weighing between 14 and 44 lb, and the extension arm supports from 33 to 43 lb from maximum to minimum extension.

FLOWCINE Serene

The FLOWCINE Serene is a two-axis spring arm stabilizer that attaches at the end of the Easyrig (2/2.5/3/Vario 5) arm. It smooths video results by mitigating vertical vibrations induced by walking or running during a tracking shot. It also stabilizes side to side motion in similar tracking situations by counter-pivoting around its center axis. The Serene also allows for full use of the Easyrig spring extension for going from high to low mode.

The Serene supports rigs weighing between 14 and 44 pounds, and the spring tension can be fine-tuned without the use of tools. It works well with the separately available FLOWCINE Gravity One as well as other gimbal rigs like the Freefly MöVI.

Please note: This product requires a permanent modification that involves partial disassembly of and drilling into the Easyrig. This may void the warranty on your Easyrig.

Modifies Your Existing Easyrig The Serene mounts at the very end of the Easyrig arm, and the string is routed upwards and through the Serene instead of the normal way straight down from the tip of the Easyrig. To make this happen, you have to modify your Easyrig arm by drilling one or two holes; depending on Easyrig model. A drilling template is included for the exact placement of the holes. FLOWCINE 2.2 - 4.5" Extension Arm for Serene 2-Axis Spring Arm

The FLOWCINE Extension Arm adds 2.2 to 4.5" to the Serene 2-Axis Spring Arm in less than 1/2" increments, which allows a much longer boom range and smoother performance in vertical stabilization. It comes with extra heavy-duty spring for Serene to allow maximum load of 33 lb at maximum extension and 43 lb at minimum extension.

Weight Supported	13.2 to 44 lb / 6 to 20 kg
Weight	3 lb / 1.4 kg

Package Weight	5.65 lb
Box Dimensions (LxWxH)	17.1 x 9.4 x 4.3"

For Use with	Serene 2-Axis Spring Arm
Cord Length	18.04' / 5.5 m
Extension Range	2.2 to 4.5" / 5.6 to 11.4 cm

Package Weight	1.37 lb
Box Dimensions (LxWxH)	11.3 x 5.25 x 1.8"

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.