The D3-CD-HB 12V COOLDOME Enclosure with Heater Blower and Vandal Tough Clear Lens from Dotworkz is designed with active on-board and thermostatically controlled air conditioning, to protect both cameras and other system-related hardware in one easy-to-install engineered form factor. It is designed as a complete outdoor solution housing for advanced camera system deployments in hot environments where temperatures exceed 105�F (41�C) but reach as high as 155�F (68�C). The COOLDOME will protect the camera inside the enclosure up to 158�F (70�C) ambient temperature. The differential between the ambient temperature and the temperature inside the COOLDOME Enclosure can be as much as 45�F (25�C).
The COOLDOME Active Cooling technology offers an outdoor camera protection system designed to protect the camera from extreme heat and direct sunlight. The COOLDOME is engineered for climates where heat damage can occur. It is IP66 rated with integrated IP68 waterproof cable ports, airtight, and sealed against outside air, dust, and salt water. Internal mounting space designed for routers, cell networks, hard drives, UPS, WiMax, and mesh hardware.
- COOLDOME thermostatically controlled active cooling technology
- Provides protection up to 158�F (70�C) with a difference of up to 45�F (25�C) with the ambient temperature
- Provides up to 145�F (63�C) protection to sensitive electronics in hot climate
- Internal Thermo-blanket permits sensitive electronics to be mounted in direct sunlight
- Switchable upper and lower camera mounting locations for maximum versatility and internal storage space utilization
- IP66 rated, airtight, and sealed against outside air, dust, water, and salt water
- Includes IP68 waterproof connection ports
UPC: 853523006499
In the Box
Dotworkz D3-CD-HB 12V COOLDOME Enclosure with Heater Blower and Vandal Tough Clear Lens
- IP68 Waterproof Connection Ports
- Limited 1-Year Warranty
| Operating Temperature | Absolute: -40 to 158�F (-40 to 70�C)
Recommended: 30 to 145�F (-1 to 63�C) |
| Power Consumption | 215 W @ 12 DC typical, both coolers engaged (without camera) |
| Power Source | Input Options: 12 VDC, 110 VAC, or 220 VAC |
| Outputs | For Camera Power: 12 VDC |
| Internal Power | 3 A @ 12 VDC on typical model |
| Dimensions (L x H x W) | 14.9 x 17.6 x 11.7" (38.0 x 45.0 x 30.0 cm) |
| Weight | 9.5 lb (4.3 kg) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
