| ₹ 505750.0 includes GST and import duties. | |
| B2B customers can avail ₹ 77126.88 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
ClearOne Beamforming Microphone Array Overview
The ClearOne BMA CT 600mm is a patented ceiling tile beamforming microphone array that blends in with most of today�s drop ceilings. Built-in acoustic echo cancellation, noise cancellation, and beam selection eliminate the need for per-beam processing in a DSP mixer, requiring fewer DSP mixer resources. The integrated features greatly reduce the system design complexity, installation, and operation as well as rack space.
Up to 3 ceiling tiles can be connected via P-Link for larger conference setups without the need for complicated network "home-run" configurations. Up to 650' can be placed between each tile for a total of 1950' cable reach. The single workflow for the configuration using the Pro Console software streamlines the setup without the need to set up separate components such as an Ethernet switch, BMA CT, Dante controller, and DSP Mixer.
- Supports 600mm grid type
- Built-in acoustic echo cancellation, noise cancellation, and beam selection eliminate the need for per-beam processing in a DSP mixer�requiring fewer DSP mixer resources
- Built-in 2x10W into 8-ohm power amplifier conveniently drives loudspeakers
- Adaptive Steering (Smart Switching)�no need to adjust individual beams�for remarkable room coverage
- Integrated features can significantly reduce system design complexity, simplify installation, streamline configuration and programming, consume less rack space, and lower cost
- Daisy-chain ceiling tiles via P-Link for larger conference setups�for simpler wiring and longer distances compared to networked �home run� connections
- Each ceiling tile microphone array supports long-distance P-Link mode with 650' between tiles, for a total cable reach of 1950'
- Single workflow for configuration using Pro Console software. No need to program separate components: Ethernet switch, BMA CT, Dante controller, and DSP mixer
UPC: 671010012248
In the Box
- ClearOne BMA CT 600mm Ceiling Tile Beamforming Mic Array for Converge Pro 2 (White)
- Limited 3-Year Manufacturer Warranty
ClearOne Beamforming Microphone Array Specs
| Microphone |
24 Microphones
Channel In: 1 (Uses P-Link Channels or C-Link Channels for Speakers, No Input Channels in CP2) Number of Beams: Two patterns, either 5 or 6 Beams Polar Pattern: Custom Frequency Response: 150 Hz to 16 kHz, ±3 dB Dynamic Range: 150 Hz to 16 kHz, >70 dB |
| Amplifier Output |
Type: 0.2" / 5.1 mm Black Header, Male, Phoenix-Type Euroblock
Audio: 2 Channels Frequency Response: 20 Hz to 22 kHz at +10 dBu, ±0.5 dB THD + Noise: 20 Hz to 22 kHz at +10 dBu, 1 W, < 0.2% Dynamic Range: 20 Hz to 22 kHz at +20 dB, >102 dB, with 20 kHz Digital Low-Pass Filter Crosstalk: Channel to Channel, Stimulus at +20 dBu to Receptor 10 W Output, 8-Ohm Load, 20 Hz to 22 kHz, < 60 dB |
| LED |
LED Indicator on One End of Unit: 4 Mute/Unmute Configuration with 8 Color Options, Two Blink Patterns and Warning Indications
|
| Configuration |
Beam Enable/Disable
Acoustic Echo Cancellation (AEC) On/Off Noise Cancellation (NC) On/Off Filters: All Pass Low Pass High Pass Notch PEQ Automatic Level Control (ALC) On/Off Gain Adjust Mute On/Off Auto Gate/Manual Gate |
| Link |
P-Link In & Out: Proprietary Network
Ports Type: RJ-45 Cable: RJ45 Cat 5e/6, Expandable Distance: Up to 600' / 182.9 m Daisy-Chain: Up to 3 Array Units and Additional P-Link Compatible Devices with Each Supported CONVERGE Pro 2 Unit in the Same Chain Up to 6 Array Units in the Same Chain with 2 Supported Converge Pro 2 Units Connected through C-Link Long-Distance P-Link: Increases P-Link Distance from 200' / 61 m to 600' / 182.9 m Max Cable Distance Between Any Two Units; Cat 6, 550 MHz, 23 AWG, Solid Conductor Cable; Do Not Use Copper Clad Aluminum (CCA) Cable |
| Power Switch |
Type: Slide Switch
Slide Toward P-Link to Power Device by P-Link Slide Toward PoE to Power Device by PoE Injector |
| Software |
Pro Console Software
|
| Power and Thermal |
Power Type: PoE
Port Type: RJ-45 Power Source: PoE Injector or Equivalent PoE: IEEE802.3at Compliant Devices Providing 56 V and 640 mA (36 W) P-Link In - Mode B PoE In - Mode A and Mode B (Each BMA CT Requires Its Own 802.3at Compliant Power Injector if Loudspeakers are Being Used Power Consumption: 100-240 VAC, 50/60 Hz 9.1 W Typical without Speaker Amp 38 W at Max Power 1 kHz (2 x 10 W) Thermal: 130 BTU/Hr at Max Power Operating Temperature: 14 to 104°F / -10 to 40°C Ambient Temperature |
| Dimensions |
23.3 x 23.3 x 0.1" / 592.5 x 592.5 x 2.1 mm
|
| Weight |
9 lb / 4.1 kg
|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 495635.0 |
| 3-5 | ₹ 490577.5 |
| 5-10 | ₹ 480462.5 |
| 10+ | ₹ 470347.5 |
Bulk discount will be automatically applied during checkout based on quantity.