BASSBOSS MFLA-MK3 Dual 12" Line Array Loudspeaker Module

What's New

MK3 Amp Update

• There are all-new amplifiers in the MK3 series. Total power has increased, however power allocated to woofers increased substantially. The higher output voltages provide more impact. Universal input voltage compatibility of 90 to 250V provides more flexibility. Waterproof connections provide more peace of mind.

MK3 Enhanced DSP

• The MK3 features an all-new 96 kHz DSP. The push-button presets have doubled from 4 to 8, and up to 100 presets can now be stored in the DSP and loaded via LAN. The comprehensive suite of processing includes meticulously tuned equalization, all necessary high-pass and low-pass filters, as well as multiple protection systems and limiters to prevent driver overload in as many ways as possible.

ControlBASS Software

• ControlBASS software supports an essentially unlimited number of possible BASSBOSS-developed or customized user presets, which integrate seamlessly and coherently with all other BASSBOSS products for effortlessly perfect setups. The latest in DSP programming developments can be added via easy remote updating.

Innovations in Performance and Practicality

• The DV12-MK3 uses a line-array derived 1.4� throat isophasic waveguide instead of a conventional horn. Coupled to the waveguide is a 3-inch-diaphragm neodymium-motor compression driver. This combination provides effortlessly high SPL over very wide and consistent horizontal coverage of 120° with a tight vertical pattern of 20°. This extends high frequency intelligibility farther than a conventional horn and allows for two arrayed cabinets to provide coherent, line array style performance.
• The lower frequencies are produced by a 12� woofer that features a Neodymium magnet for light weight and high efficiency, a 4� voice coil for high power handling, and a symmetrical, long-excursion suspension for accurate and extended bass response. So much bass response that it could easily serve as a subwoofer driver.

Fixed-Point Flyware

• Fixed-Point Flyware ensures absolutely consistent box-to-box alignment. The high-frequency output of an array can only remain coherent at higher frequencies if the cabinets cannot move front-to-back once the pins are inserted. The MFLA-MK3�s unique precision alignment mechanism prevents movement in the direction that influences time domain alignment, front-to-back, which is critical to ensure the phase of the high-frequency signals remain coherent from box to box. This feature dramatically improves the very high-frequency propagation effectiveness of the entire array, allowing the MFLA-MK3 to deliver pristine highs at greater distances.
• The MFLA-MK3 Flyware features a simultaneous compression and tension mechanism, allowing the cabinets to be flown or ground stacked using the same simple setup. The proprietary flyware design ensures there is no slack or shifting in the box alignment once the boxes are pinned. The mechanism allows for single-handed adjustment of splay angles for ground-stacked operation or in preparation for flying.

Comprehensive Digital Signal Processing

• Every BASSBOSS product features dedicated and integrated signal processing. Proprietary measurement and processing systems allow BASSBOSS products to deliver superior performance and value compared to others of similar size, price, or coverage. The innovative, sophisticated protection in the DSP allows the drivers to run louder and longer and remain reliable. The nature of the processing, along with the proprietary limiters, allows the speakers to maintain their character and sound quality to a level higher than you might believe possible.
• The protection systems involve several techniques running simultaneously to effectively prevent thermal overload of the voice coils and limit excessive excursion. Due to the sophistication of these multiple, independent yet simultaneous processes, the drivers can be protected while the actions of the limiters have virtually no noticeable effect on the transient response of the loudspeaker. Reducing thermal saturation not only prevents burned voice coils, it also minimizes long-term thermal compression. Peak output can be achieved consistently, repeatedly and safely.

etherCON Interface

• The new DSP features an Ethernet interface that can be used to control the cabinets from a computer or to load software or firmware updates. The ethernet connectivity in conjunction with the DSP board allows signal to be sent via Milan AVB. Firmware updates will provide access to this feature.
• Within the software, multiple cabinets can be grouped together, allowing them to respond to commands simultaneously. This permits the levels of multiple loudspeakers to be adjusted together and yet independently from the levels of other groups of loudspeakers. In addition to individual and grouped level controls, presets can be loaded and signal levels and temperatures can be monitored. Each cabinet includes a two-port switch so multiple cabinets can be chained on the same data cable.
• The MK3 DSP features storage capacity of up to 100 presets, eight of which can be accessed at the touch of a button with no need for a connected computer. The eight directly accessible presets are compatible with all the presets in the MK3 Top Boxes and are also compatible with previous generation tops and subs.

Neutrik powerCON True 1 TOP

New to the MK3 are Neutrik powerCON True 1 TOP (Total Outdoor Protection) waterproof main connectors, along with a totally isolated input connection section and cones that are also waterproof allow the MK3 series to be used outdoors without fear of what the weather will bring, or used indoors without fear of what the partiers bring.

BASSBOSS MFLA Mk3 Specs

Configuration	Active 2-Way
Enclosure Type	Bass-Reflex Line Array
Total Power Capacity	3200 W
HF Driver	2 x 3" / 76.2 mm Horn-Loaded Compression Driver with 1.4" / 35.6 mm Throat
MF Driver	No
LF Driver	2x 12" / 30.5 cm Woofer
Wireless Connectivity	No
Color	Black

Enclosure Type	Bass-Reflex Line Array
Total Power Capacity	3200 W
Amplifier Power Rating	LF: 1 x 2400 W RMS HF: 1 x 800 W RMS
Amplifier Class	Class-D

HF Driver	2 x 3" / 76.2 mm Horn-Loaded Compression Driver with 1.4" / 35.6 mm Throat
MF Driver	No
LF Driver	2x 12" / 30.5 cm Woofer
LF Voice Coil	3.5" / 8.9 cm
Magnet	LF: Neodymium

Frequency Response	60 Hz to 18 kHz ±3 dB
Maximum SPL	142 dB (Peak)
Coverage Angle	120° H x 10° V

Audio I/O	1x XLR 3-Pin Female Balanced Line Input 1x XLR 3-Pin Male Balanced Line Thru
Network I/O	2x etherCON (Control/Network) In/Out
USB I/O	No
Wireless Connectivity	No
Bluetooth	No
Mobile App Compatible	No

EQ	No
Parametric EQ	No
Semi-Parametric EQ	No
Filters	No
Dynamic Processing	Limiter
Alignment Delay	No
Phase Adjustment	No
Digital Signal Processing	User Settings, Venue Settings, Voicing Modes (Adjustable via Optional Software)
Maximum Sampling Rate	96 kHz / 24-Bit

AC Input Power	100 to 240 VAC, 50 / 60 Hz
AC Power I/O	1x PowerCON TRUE1 Input (Locking)
Current Consumption	120 VAC: 5 A 240 VAC: 2.5 A

Color	Black
Mounting	Integrated Rigging
Handles	1x Each Side
Environmental Resistance	No
Construction Material	Plywood, Polyurethane, Steel
Dimensions	40.5 x 20.4 x 16.1" / 102.9 x 51.8 x 40.9 cm
Weight	104 lb / 47.2 kg