Aviom Mix320-A-MEE Personal Mixing System, MEE M6 Earbuds, and Analog Interface Kit

The Mix320-A-MEE Personal Mixing System, MEE M6 Earbuds, and Analog Interface Kit from Aviom includes six A320 personal mixers, an AN-16/i V.2 input module, a D400 A-Net distributor, six MT-1a microphone stand mounts, seven L-25 25' Cat-5e cables, and six MEE Audio M6 Pro IEMs. This kit can be used to obtain better personal mixes for six individuals, to tailor and hear instruments exactly as needed for live stage, theater, and recording studio applications, which makes sessions more efficient and improves an individual's performance.

• A320 Personal Mixer

  The A320 Personal Mixer from Aviom gives performing and recording musicians simple, intuitive control over their monitor mixes, allowing them to dial in the perfect mix themselves, without having to tell an engineer to change the mix for them.
  
  Offering three-band master tone controls optimized for in-ear monitors, and the ability to monitor 16 mono or stereo sources with per-channel volume and stereo placement, the A320 gives musicians powerful control over their mix, while also preserving the simplicity required for use while performing.
  
  The A320 also provides the musician a way to maintain specific mix settings consistently, night after night, and show after show. The unit includes space for eight mix presets, so you can save the perfect mixes for each tune, and recall them at will, to ensure reliable results in your monitors every time.

  How It Works:

  Whether you're adding to an existing Aviom personal mixing system or building a new one, getting up and running with the A320 is designed to be a breeze. For older systems, the A320 runs in Pro16 mode, with 16 channels spread across the interface and stereo sources occupying adjacent channel buttons, like on the popular A-16II Personal Mixer. For systems with more channels, the A320 switches into Pro16e mode, utilizing the full power of its 32-channel mix engine to support any combination of 16 mono or stereo sources

• AN-16/i V.2 Input Module

  The AN-16/i v.2 Input Module from Aviom is used to connect up to 16 balanced line-level inputs from a console�s direct outputs, insert points, aux sends, and/or submixes to a personal mixing system or digital snake. When used alone, one AN-16/i v.2 Input Module can generate a single 16-channel Pro16 A-Net signal. The module converts the 16 line-level analog audio channels into uncompressed 24-bit, 48kHz digital audio data.

  The input module includes an A-Net input jack for connecting up to 3 additional Pro16 series input devices. It merges its analog inputs with the incoming A-Net stream, creating the expanded Pro16e digital audio stream utilized by Aviom�s A360 Personal Mixer. The digital audio data is output on standard Cat-5e cables.

  The front panel of the input module has 8 4-position input level/gain sensitivity switches, stereo channel link switches for every channel pair, and per-channel signal present and clip LEDs. Digital network connections on the rear panel include one A-Net in jack and one A-Net out jack.

  The rear panel of the AN-16/i v.2 Input Module also features 16 analog audio inputs with balanced 1/4� TRS jacks. An audio thru jack for each input allows the module to be inserted seamlessly into an existing audio signal path. The input module can be used with any line-level analog audio signal such as console direct outs, inserts, or auxiliary sends.

  The AN-16/i v.2 Input Module works in conjunction with Aviom�s modular Pro16 digital snake and audio distribution system products to support a range of flexible configurations including 16x0, 32x0, 48x0, 64x0, 16x16, 32x16, 32x32, and 48x16. All configurations support an unlimited number of digital splits with no loss in audio quality.

  Converts 16 line-level analog audio channels to a Pro16e A-Net digital stream

  A-Net In with 4-position slot range selector switch for generating Pro16e A-Net for A360 personal mixers

  16 balanced line-level inputs (1/4" TRS connectors)

  16 balanced line-level Thru jacks (1/4" TRS connectors)

  48 kHz, 24-bit A/D converters

  4-position gain sensitivity switch per channel pair (+22, +4, 0, -10dB)

  Stereo Link switches for each channel pair

  Signal present and clip LEDs per channel

• D400 A-Net Distributor

  The D400 A-Net Distributor from Aviom is a 2RU rackmountable device designed to deliver power and audio to up to eight Aviom personal mixers such as the A360, A320, A-16II, and A-16R. D400 includes a Pro16e A-Net input, compatible with all Pro16 Series and Pro16e-capable devices, and eight A-Net outputs, designed for use with Aviom personal mixers. These eight outputs feature isolated (floating ground) DC power for providing remote power via Cat-5e to Aviom personal mixers. Additionally, it includes an unpowered A-Net Out, which can be used to connect additional A-Net Distributors, output modules, or other compatible devices.

  The D400 is powered by an internal power supply, with a detachable power cord and IEC power inlet on the rear panel. The rear panel features a voltage selection switch that allows you to set the unit for 115 or 230 VAC operation. All network connections on the D400 use RJ45 connectors.

  Distributes power and audio to up to eight personal mixers like A320 and A360

  One unpowered Pro16e A-Net Out for thru connections

  A-Net Offset switches to set the range of Pro16e network slots to be sent to personal mixers

  Simple stereo channel assignments, thanks to stereo link DIP switches

  Supports legacy A-16II and A-16R Personal Mixers

• MT-1a Mic Stand Mount

  The MT-1a Mic Stand Mount from Aviom attaches to any standard mic stand to support the Aviom A360, A320, or A-16II Personal Mixer, or the A-16CS Control Surface. It attaches to the bottom of these products with three included screws and mounts on a mic stand with two supplied ring nuts.
  
  The MT-1a can also be used with the Aviom EB-1 Extension Bracket, sold separately, to mount on the side of a mic stand instead of on top of it. The EB-1 is a right-angle bracket that secures along the shaft of a mic stand offset to the side, and the MT-1a then attaches on top of it with the same ring nuts.

• M6 PRO 2nd Generation Universal-Fit Noise-Isolating Musician's In-Ear Monitors with Detachable Cables (Clear)

  Building upon the success of the original M6 Pro monitors, the clear MEE audio M6 PRO Universal-Fit Noise-Isolating Musician's In-Ear Monitors with Detachable Cables are designed for musician's and audio enthusiasts for long listening sessions while on-stage, at home, or on-the-go. The second-generation design offers a refined tuning above 2 kHz for an even more accurate midrange and smoother, more natural treble. Connection points and other hardware have been redesigned for the 2nd generation model to improve toughness under harsh conditions.
  
  The M6 PRO utilize 10mm dynamic moving-coil drivers to deliver deep bass and clear highs with a frequency response of 20 to 20,000 Hz, a 16-Ohm impedance, and a sensitivity of 100 ±3 dB (1 mW at 1 kHz). It can handle a maximum power input of 30 mW, and the detachable headset cable includes an omnidirectional microphone for making calls, as well as a media remote and volume control (iOS & Android compatible). The headphones provide a secure over-the-ear fit and an in-ear design, which reduces outside noise. The Mee audio M6 PROs include an audio cable, a headset cable, a protective carrying case, a set of Comply T-Series foam eartips, six sets of silicone eartips, two shirt clips, and a 1/4" adapter.

  Improved Sound

  • Ultrathin 5µm driver diaphragm and aluminum voice coil
  • Delivers clear, full-range audio
  • 2nd-generation features a revised tuning above 2 kHz for an even more accurate midrange and a smoother, more natural treble

  Sound-Isolating Design

  • Sealed in-ear design
  • Comply T-Series memory foam eartips reduce outside noise
  • Safer listening volumes and improved sound quality

  Exceptional Fit & Comfort

  • Designed for extended listening sessions
  • Lightweight, low-profile design with flexible over-the-ear memory wire and seven pairs of eartips
  • Ensures a secure, personalized fit

  Built to Last

  • Engineered for real-world reliability
  • Sweat-resistant IPX5
  • Detachable, replaceable cables, with both a regular stereo cable and headset cable included
  • Connection points and other hardware have been redesigned for the 2nd generation model to improve toughness under harsh conditions

  Headset Cable with Mic and Remote

  • Headset cable features a built-in microphone and remote
  • Seamlessly take calls and control media playback with compatible phones and tablets (iOS & Android)

  Personalized Design Options

  • Personalize your in-ears with custom-engraved metal faceplates
  • Choose from existing art options or submit your own design
  • Available exclusively for the M6 PRO 2nd generation in-ear monitors

  UPC: 616312625246

• Limited 1-Year Warranty

• Limited 1-Year Warranty on Parts & Labor

• Limited 1-Year Warranty

• Set of Three Screws

• Set of Two Threaded Ring Nuts

• Limited 1-Year Warranty

• Stereo Audio Cable

• Stereo Headset Cable (with Inline Remote)

• Protective Carrying Case

• Pair of Comply Foam Eartips

• 6 x Pairs of Silicone Eartips

• 2 x Shirt Clips

• 1/4" Adapter

• Limited 1-Year Warranty

Also Includes

• 7 x 25' Cat-5e Cables