₹ 65090.0 includes GST and import duties. | |
B2B customers can avail ₹ 9926.23 ITC on this product | |
100% Secure Payments | 100% Genuine product | |
The product is eligible for Free Shipping |
Description
Audioengine HD4 Overview
- 1Description
- 2Cabinets
- 3Furniture-Grade Finishes
- 4Custom Components
- 5Based on Studio Monitor Designs
- 6High-Quality Bluetooth Audio
- 7HD3 Headphone Amplifier
- 8Amplifier Design
- 9Driver Designs
- 10Shielding
- 11Headphone Amp
- 12Additional Features
- 13Efficient Integrated Design
Designed to connect to virtually any device, the satin black Audioengine HD4 Bluetooth Speaker System provides a 3.5mm input, a stereo RCA input, a micro-USB input, and Bluetooth connectivity with aptX HD support, which allows for wireless connectivity with your compatible devices. Each speaker consists of a 4" woofer and a 0.75" tweeter and output up to 30W per channel RMS, or 60W per channel peak for room-filling sound. For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with speaker wire.
Cabinets
Furniture-Grade Finishes
Custom Components
Based on Studio Monitor Designs
High-Quality Bluetooth Audio
- Extended-range wireless: Most Bluetooth implementations have very limited range, typically within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that has up to 3 times the range of standard Bluetooth for multi-room use, with no degradation in audio quality.
- 24-bit DAC: The HD4 Bluetooth receiver and USB input both utilize the PCM 5102 DAC, widely known for its low noise and high fidelity. The PCM 5102 is used as an upsampling DAC and will pad all bit depths to 24-bit, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the PCM 5102, the fact that digital signal is upsampled to 24-bit as well as the added benefit of onboard triple redundancy power source conversion and filtering the HD4 Bluetooth implementation presents impressive low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices.
HD3 Headphone Amplifier
Amplifier Design
Driver Designs
Shielding
Headphone Amp
- 2 VRMS full-scale headphone output level
- 2 ohm output impedance
- 10 ohm to 10 kilohm recommended headphone impedance level
Additional Features
- <50 dB crosstalk
- Output current limiting, thermal over-temperature, and power on/off transient protection
- Input data rate determined by Bluetooth
- ~30 ms wireless latency
- Micro-USB 1.1 input
- 0.7" thick MDF cabinets with real wood veneer
- Tweeters with neodymium magnets
- Aramid fiber woofers with advanced voice coils
Efficient Integrated Design
In the Box
- Audioengine HD4 Bluetooth Speaker System (Satin Black, Pair)
- 2 x Speaker Grilles
- Power Cord
- Limited 3-Year Warranty
- Description
- Cabinets
- Furniture-Grade Finishes
- Custom Components
- Based on Studio Monitor Designs
- High-Quality Bluetooth Audio
- HD3 Headphone Amplifier
- Amplifier Design
- Driver Designs
- Shielding
- Headphone Amp
- Additional Features
- Efficient Integrated Design
Audioengine HD4 Specs
Speaker Configuration | 2-Way |
Amplifier Power Rating | 60 W RMS 120 W Peak |
Drivers | 1 x 4" / 101.6 mm Woofer (per Speaker) 1 x 0.75" / 19.05 mm Silk Dome Tweeter (per Speaker) |
Enclosure Type | Bass-Reflex |
Ports | 1 x Front-Firing (per Speaker) |
Frequency Response | 60 Hz to 22 kHz (±1.5 dB) |
Magnetic Shielding | Yes |
Wired Connectivity | Active, Left: 1 x Stereo RCA Input 1 x Stereo RCA Output 1 x 1/8" / 3.5 mm Input (Audio) 1 x Micro-USB Input (Audio) 1 x Binding Post Pair Output (to Other Speaker) Active, Right: 1 x Binding Post Pair Input (from Other Speaker) |
Amplifier Class | 2 x Class-AB |
SNR (Signal-to-Noise Ratio) | 95 dBA |
THD (Total Harmonic Distortion) | < 0.05% |
Input Impedance | 5 Kilohms |
Wireless Connection Protocols | Bluetooth |
Bluetooth | 5.0 |
Wireless Range | 100' / 30.5 m |
Supported Audio Codecs | AAC, SBC, aptX, aptX HD, aptX LL |
AC Input Power | 110 to 240 VAC, 50 / 60 Hz |
Power Consumption | 10 W (Standby) |
Supported Sample Rates | Up to 44.1 kHz Up to 48 kHz |
Placement & Mounting Options | Tabletop/Bookshelf |
Cabinet Material | MDF |
Operating Temperature | 32 to 95°F / 0 to 35°C |
Storage Temperature | -4 to 113°F / -20 to 45°C |
Operating Humidity | 5 to 95% |
Dimensions | 5.5 x 6.5 x 9" / 14 x 16.5 x 22.9 cm (Each) |
Weight | Active, Left: 7.2 lb / 3.3 kg Passive, Right: 5.4 lb / 2.4 kg |
Package Weight | 15.71 lb |
Box Dimensions (LxWxH) | 14.7 x 12.7 x 9.7" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
Quantity | Price |
2 | ₹ 63788.2 |
3-5 | ₹ 63137.3 |
5-10 | ₹ 61835.5 |
10+ | ₹ 60533.7 |
Bulk discount will be automatically applied during checkout based on quantity.