Ampridge MIGHTYMIC F Overview
Bundled together to provide a wireless mini shotgun mic setup for boom operators, videographers, and mobile journalists, the Ampridge MightyMic F Pack (Rev 2) includes the MightyMic F (Rev 2) ultracompact shotgun microphone, the MightyMic Pro Bluetooth adapter, and all the accessories you'll need to get going. The Rev 2 version of the MightyMic F now includes a TRRS extension cable and a TRS camera adapter in place of the coiled TRRS to TRS adapter cable that comes with the original version, allowing even more versatility in operating styles.
Connect the MightyMic F directly into the 3.5mm port on the MightyMic Pro, then set the Pro's selector switch to "E" to accept the external microphone. The MightyMic Pro can now stream the mic signal to your Bluetooth-enabled smartphone or tablet for convenient wireless recording. To reduce wind noise when shooting indoors or outside, the MightyMic F Pack includes a foam windscreen and a furry windshield.
Ampridge MightyMic F Ultracompact Camera-/Phone-Mount Shotgun Microphone (Rev 2)
Whether you shoot with a mobile device or a traditional camera, the Ampridge MightyMic F (Rev 2) ultracompact shotgun microphone offers an affordable upgrade in sound quality with its front-facing directionality and indoor/outdoor wind protection, a welcome solution for run-and-gun videographers, vloggers, and mobile journalists looking to improve their audio recordings without weighing down their rig.
Since the MightyMic F runs on plug-in power and has no controls to set up, it is thoroughly simple to use. For mobile devices, just plug the integrated 3.5mm TRRS male connector directly into the headphone port of your smartphone or tablet and attach the mic stabilizer to hold the mic securely in place. Alternatively, attach the MightyMic F to your camera via the included shoe shockmount and use the supplied mic extension cable and camera adapter to connect the mic to your camera's input port.
The microphone features a built-in 3.5mm headphone port to enable real-time monitoring of your recording or playback with compatible apps such as FilmicPro, MoviePro, and MightyMic Pro Recorder. Plus, the MightyMic F can be connected to the MightyMic Pro (available separately) for convenient wireless recording to your Bluetooth-enabled mobile device.
Rev 2 vs Original
Compared to the original MightyMic F, the Rev 2 version features a change to the included cabling. The MightyMic F Rev 2 has a mic extension cable (3.5mm TRRS female to TRRS male) and a separate camera adapter (3.5mm TRRS female to TRS male), whereas the previous MightyMic F came with a single coiled camera adapter cable (3.5mm TRRS female to TRS male). This allows it to support four styles of operation.
- Plug it into the headphone jack on an iPad or any phone that still has a headphone jack
- Mount it on the shoe of a camera and use the supplied cable and adapter to connect the microphone into the mic input on the camera
- Mount it onto a shoe mount on a phone rig like a Beast Grip, etc. and use the extension cable to connect to the headphone jack or to the Lightning adapter on an iPhone
- Attach it on the end of a boompole and use the MightyMic Pro adapter (available separately) to wirelessly send Bluetooth audio to a phone or tablet
Miniature Shotgun-Style Mic
- Ultracompact and featherweight shotgun-style condenser microphone
- Cardioid polar pattern reduces background noise from the rear and sides of the mic
- Requires no batteries for operation
- Includes two forms of wind protection�a furry windshield for outdoor use and a foam windscreen for indoor use
Works with Mobile Devices and Cameras
- Integrated 3.5mm TRRS male plug connects to the headphone port of a smartphone or tablet
- Mic stabilizer allows more secure attachment to a mobile device
- Includes shoe shockmount with a 1/4" thread for mounting on a camera, tripod, or boompole
- 3.5mm TRRS extension cable allows connection between a mobile device and the MightyMic F when the mic is mounted on the shoe of a smartphone rig
- 3.5mm TRRS to TRS adapter for connection to the mic input of a DSLR, mirrorless camera, or camcorder
Compatible with Wireless Adapter
- Designed for compatibility with the Ampridge MightyMic Pro wireless smartphone adapter (available separately), ideal for use on a boompole
Real-Time Headphone Monitoring
- Built-in 3.5mm headphone jack
- Allows real-time monitoring during recording or playback when using supported apps such as FilmicPro, MoviePro, and MightyMic Pro Recorder
UPC: 855515002304
Ampridge MightyMic Pro Wireless Microphone for Smartphones and Tablets
Pair the ultracompact and featherweight Ampridge MightyMic Pro wireless microphone to your smartphone or tablet via Bluetooth and achieve better voice capture quality for audio and video recording projects, e-meetings, Zoom and Skype calls, podcasts, and livestreams. Thanks to its integrated clip and built-in omnidirectional condenser capsule, the MightyMic Pro functions as a convenient clip-on wireless mic for your Bluetooth-enabled mobile device.
A 3.5mm port on the MightyMic Pro allows easy hookup of headphones or an external TRRS microphone such as a lavalier or compact shotgun mic. The dedicated internal/external microphone switch ensures simple selection of the desired signal source. Equipped with three sensitivity settings and automatic gain adjustment, the MightyMic Pro provides effective level control with minimal effort.
The internal battery delivers up to nine hours of run time to accommodate back-to-back recording sessions or all-day meetings. The USB Type-C port can be used to recharge the internal battery or connect an external USB power source for extended operation of the MightyMic Pro.
Easy Operation
- Bluetooth 5.0 direct connection to smartphone; no adapters needed, just pair to your phone (can pair to two phones)
- Large power/multifunction button
- Side-panel buttons for volume adjustment and track navigation
- Rear-mounted clip for easy attachment to a shirt, tie, or belt
- Three sensitivity settings with automatic gain on each setting
- Switch for internal or external microphone mode
- Supports use as a wireless microphone for Zoom and Skype calls
- Operating range up to 30'
- Patent-pending design
Versatile Functionality
- High-grade, custom-tuned, built-in omnidirectional microphone element
- Top-mounted 3.5mm TRRS jack for headphones or external TRRS microphones
- Built-in DSP noise reduction
- Works simultaneously with DJI Gimbal mounts (with Filmic Pro app)
- Functions as a mobile phone headset or music player
- Can be used for wireless monitoring with GarageBand and Filmic Pro
Flexible Powering
- Internal rechargeable battery provides up to nine hours of usage
- Supports extended time with external battery packs
- USB Type-C port for charging or connecting an external battery pack
- Automatic shut-off if unpaired for five minutes
UPC: 855515002212
In the Box
- Ampridge MightyMic F Ultracompact Camera-/Phone-Mount Shotgun Microphone (Rev 2)
- Shoe/Tripod Shockmount
- 3.5mm TRRS Mic Extension Cable
- 3.5mm TRRS to TRS Camera Adapter
- Furry Windshield
- Foam Windscreen
- Mic Stabilizer for Smartphones
- Carrying Pouch
- Storage Bag
- Limited 1-Year Warranty
- Ampridge MightyMic Pro Wireless Microphone for Smartphones and Tablets
- USB Type-C Charging Cable
- Deluxe Carrying Pouch
- Limited 1-Year Warranty
Ampridge MightyMic F Ultracompact Camera-/Phone-Mount Shotgun Microphone (Rev 2) Specs
Microphone
Primary Applications |
Web-Streaming, Recording to Mobile Device, Audio for Video |
Form Factor |
Camera-Mount / Mobile Device Mic / Shotgun Mic |
Intended Sound Sources |
Speech/Voice Over, Room Ambiance |
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
1 x Electret Condenser |
Polar Pattern |
Cardioid |
Orientation |
End Address |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
None |
Tone Adjustment |
None |
Gain Adjustment |
None |
Indicators |
None |
On-Board Controls |
None |
Windscreen |
Foam, Windsock/Windjammer (Included) |
Performance
Frequency Range |
50 Hz to 20 kHz |
Maximum SPL |
110 dB SPL |
Sensitivity |
-34 dB |
Dynamic Range |
100 dB |
Signal-to-Noise Ratio |
70 dB |
THD |
< 1% |
Connectivity
Output Connectors (Analog) |
1 x 1/8" / 3.5 mm TRRS Male (on Mic) 1 x 1/8" / 3.5 mm TRS Male (with Included Adapter) |
Headphone Connector |
1 x 1/8" / 3.5 mm |
Power
Operating Voltage |
Not Specified by Manufacturer |
Physical
Mounting |
Direct Connection to Mobile Device (via Integrated Hardware) Camera/Shoe-Mount (with Included Hardware) |
Mounting Thread Size |
1/4"-20 Female |
Included Case |
Pouch |
Included Filters |
None |
Dimensions |
ø: 0.8 x L: 3.5" / ø: 21 x L: 88 mm |
Weight |
1 oz / 28.5 g |
Packaging Info
Package Weight |
0.225 lb |
Box Dimensions (LxWxH) |
5.9 x 2.9 x 2.6" |
Ampridge MightyMic Pro Wireless Microphone for Smartphones and Tablets Specs
Wireless Technology |
Digital Bluetooth (2.4 GHz) |
RF Frequency Band |
2402 to 2480 MHz |
Max Operating Range |
30' / 9.1 m (Line of Sight) |
Max Transmitters per Band |
1 |
Encryption |
None |
Transmitter
Transmitter Type |
Clip-On with Microphone |
RF Output Power |
Not Specified by Manufacturer |
Audio I/O |
1 x 1/8" / 3.5 mm TRRS Female Unbalanced In/Out |
Pad |
None |
Muting |
None |
Auto-Level Control |
Yes |
Gain Range |
-6 to +0 dB (3 dB Steps) |
Signal Processing |
None |
Frequency Response |
20 Hz to 20 kHz (Dependent on Mic) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.