ANALOG DEVICES AD8170ARZ-R7 Switching Multiplexer, 2:1, 2 Circuit, ± 4V to ± 6V Supply, -40 °C to 85 °C, NSOIC-8

AD8170ARZ-R7 is a (2:1) very high-speed buffered multiplexer w/amplifier. This multiplexer offers an internal current feedback output amplifier whose gain can be programmed via external resistors and is capable of delivering 50mA of output current. It offers a -3dB signal bandwidth of 250MHz and a slew rate of greater than 1000V/µs. Additionally, the AD8170 has excellent video specifications with low differential gain and differential phase error of 0.02%, 0.05°, and 0.1dB flatness out to 80MHz. It is used in applications such as pixel Switching for �Picture-In-Picture�, LCD and plasma displays, and video routers.

• Fully buffered inputs and outputs, low cost
• Internal current feedback output amplifier, flexible gain setting via external resistor(s)
• Rise and fall time is 1.6ns typical at (TA = +25°C, VS = 65V, RL = 150V, G = +2, RF = 499V)
• Input bias current is 7µA typical at (TA = +25°C, VS = 65V, RL = 150V, G = +2, RF = 499V)
• Input common-mode rejection ratio is 56dB typical at (CMRR, ?VCM = 1V)
• Output current is 50mA typical at (RL = 10 ohm, TA = +25°C, VS = 65V, RL = 150V, G = +2, RF = 499V)
• Gain accuracy is 0.4% typical at (G = +1, RF = 1Kohm, TA = +25°C)
• Total harmonic distortion is -60dBc typ at (�C = 10MHz, VO = 2V p-p, RL = 150 ohm)
• Input voltage noise is 10nV/?Hz typical at ( � = 10KHz to 30MHz)
• Operating temperature range from -40°C to +85°C, 8-pin SOIC package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party