- Load Capacity: 8.8 lb
- Max Height: 59.5"
- Min Height: 8.1"
- Folded Length: 21"
- Leg Sections: 4
- Weight: 3.25 lb
- Anodized Aluminum Construction
- Single Lever Ball Head
- Five Bubble Levels
The Oben AC-1431 4-Section Aluminum Tripod with BA-108 Ball Head provides supports up to 8.8 lb, rises to a maximum height of 59.5" with the center column fully extended, and folds down to a compact 21" for transport. Flip locks on the four-section legs facilitate rapid setup and break down. Three leg angles: normal (80°), low (55°) and extra low (24°) are available via angle adjustment tabs at the joint of each leg.
The center column can be reversed with a twist of the butterfly knob, or it can be split in two to be used as a short column for macro and low angle shooting as low as 8.1". Any combination of leg angles can be combined to accommodate uneven terrain, stairs or obstructions. A built-in bubble level helps you square up your compositions. For extra stability the center column employs a spring-loaded counterbalance hook.
The included BA-108 ball head features a single-action lever that controls its rotation and 360 degree panning while a robust ball-locking mechanism secures it solidly. The head's four bubble levels ensure accurate panoramas. The BA-108's built-in quick release comes with a camera plate that features a standard 1/4"-20 screw and a retractable, removable video pin to provide additional stability for camcorders. Since the head is removable, locking screws underneath the collar thwart torsion when re-attaching. The tripod comes with a carry case and shoulder strap for storage and transport.
- Center column can be separated into 2 parts to give you a short column for low angle and macro work
- Center column is grooved to prevent rotation
- Spring-loaded counterweight hook is located at the bottom of the center column
- Leg cushions on 2 legs provide a firm grip in cold or wet weather
- Tripod features reversible 1/4"-20 and 3/8"-16 screw to fit almost any head
- Angle adjustment locks keep legs at the chosen angles
- Angled rubber feet for maximum contact with the ground
- Two included Allen keys attach to a tripod leg, so you're always ready to tighten components
- Padded carry bag provides a snug fit for the tripod/head combination and features two heavy-duty zippers, an interior pocket with a zipper, and a shoulder strap
UPC: 847628556300
| General |
| Material | Aluminum |
| Load Capacity | 8.8 lb (4.0 kg) |
| Maximum Height | 59.5" (151.1 cm) |
| Maximum Height w/o Column Extended | 49.6" (126 cm) |
| Minimum Height | 8.1" (20.6 cm) |
| Folded Length | 21" (62.2 cm) |
| Head Attachment Fitting | 1/4"-20 and 3/8"-16 via reversible screw |
| Weight | 3.25 lb (1.47 kg) including ball head |
| Legs |
| Sections | 4 |
| Leg Lock Type | Flip-lock |
| Independent Leg Spread | Yes |
| Spiked/Retractable Feet | No |
| Center Brace | No |
| Leg Tube Diameters | Maximum: 0.98" (25 mm) |
| Center Column |
| Center Column Type | Rapid: grooved, reversible, non-rotating
Separates in two to allow use of short center column |
| Center Column Sections | 2 |
| Bubble Level | 5 (1 on chassis, 4 on head) |
| Head |
| Head Type | Single-lever ball head |
| Quick Release | Yes, with 1/4"-20 screw & retractable video pin |
| Load Capacity | 8.8 lb (4.0 kg) |
| Dimensions | Ball diameter: 0.94" (24 mm)
Height: 3.0" (7.6 cm)
Base diameter: 1.5" (3.8 cm) |
| Weight | 0.55 lb (0.24 kg) |
| Packaging Info |
| Package Weight | 5.2 lb |
| Box Dimensions (LxWxH) | 24.5 x 5.0 x 5.0" |
In the Box
Oben AC-1431 Aluminum Tripod with BA-108 Ball Head
- BA-108 Single Lever Ball Head
- Padded Carrying Case
- Shoulder Strap for Case
- Leg Tool Clip with 2 Allen Keys
- Hex Key for Split Column
- Limited 5-Year Warranty
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
