Tilta Tiltaing Kit D for Sony a7S III (Tactical Gray)

In a robust four-sided design fashioned in tactical gray, the Tilta Full Camera Cage for Sony a7S III provides two shoe mounts, a 15mm rod port, and an ARRI-standard rosette with an M6 thread for attaching optional handgrips. The rod port, which is built into the cage, is secured tightly with an integrated screw on the rear side of the port, using an included Allen key. The cage also offers 1/4"-20 and 3/8"-16 mounting threads for accessories, and there are multiple 1/4"-20 threads on the bottom of the cage that allow you to find the optimal balance for your camera when mounting on tripods, gimbals, and other supports.

Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight tactical gray Quick Release Top Handle from Tilta. The quick release handle's features include two shoe mounts, a 15mm rod port, multiple 1/4"-20 and 3/8"-16 threads, and a 3/8"-16 thread with locating pins.

The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8"-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.

The HDMI Cable Clamp Attachment for Sony a7S III Full Cage from Tilta attaches to the side of the cage with a single screw and a locking pin to clamp your HDMI cable connector and prevent it from accidental disconnection. This version of the clamp is designed in Tilta gray to best match the Tilta gray version cage. After securing the clamp to the cage, you can use the included Allen key to tighten it around the cable connector by tightening the integrated screw at the top of the clamp. The integrated screw is ridged, so you can tighten it with your fingers as well, although not as tight.

Attaching to the bottom of Tilta full and half camera cages for the Sony a7S III camera, this compact dovetail-style Bottom Plate, in tactical gray, ensures the correct mounting hole placement and 15mm rod-to-lens camera height for the a7S III.

Using two included screws, the compact Arca-Swiss Quick Release Plate, in Tilta gray, attaches to the bottom of Tilta full and half camera cages for the Sony a7S III. The cage can then be mounted directly on tripod heads, ball heads, and other supports that accept Arca-Swiss camera plates.

Using two included screws, the compact Manfrotto Quick Release Plate, in Tilta gray, attaches to the bottom of Tilta full and half camera cages for the Sony a7S III. The cage can then be mounted directly on tripod heads, ball heads, and other supports that accept Manfrotto camera plates.

Maintain easy access to HDMI functionality while protecting your camera's port with the HDMI Male to Female Cable for Camera Cages from Tilta. This short 6.7" cable is meant to be used with cameras fitted into Tilta camera cages. Simply plug it into the HDMI port of your camera and secure the HDMI female end to the cage with the integrated screw. Once connected, you can plug full-sized HDMI cables in and out of the cable, rather than risking damage to your camera's port.

The Tiltaing Side Handle Run/Stop Cable from Tilta gives you run/stop capabilities in the Sony a6/a7a9 camera series. Simply plug the 7-pin end of the cable into the Tiltaing Side Power Handle with Run/Stop and the other end into the R/S port of the camera. Note that this cable was specifically designed for the Tiltaing Side Power Handles with Run/Stop so the R/S function only works with these handles.