ANALOG DEVICES LTC3336ACBZ-2-R7 DC-DC Converter, Buck, 250mA, 2.5V to 15 V In, 1.2V to 5 V Out, WLCSP-12

LTC3336ACBZ-2-R7 is a compact high high-efficiency nanopower hysteretic buck DC/DC that can deliver up to 250mA of output current from a 2.5V to 15V input. Input quiescent current is typically 65nA with the output in regulation at no load for output voltages less than 2.4V, this number is reduced further for higher output voltages at which internal circuits can be boot-strapped from the output. Performance specifications are ideal for primary (i.e., non-rechargeable) battery-powered applications: low IQ plus the ability to set the peak current to a level matched to the battery�s maximum capacity point. It is used in applications such as low-power primary battery-powered systems (e.g., 1× to 3× Li-Ion primary, 3× to 8× AAA), remote industrial sensors (e.g., meters, alarms), asset trackers, electronic door locks, keep-alive supplies/battery backup, SmartMesh® applications.

• Input voltage range from 2.5V to 15V
• Low IQ dropout mode, power good (PGOOD) output
• VIN quiescent current is 65nA typ at (sleeping (in regulation), VOUT settings <lt/> 2.4V)
• VOUT quiescent current is 25nA typ at (sleeping (in regulation), VOUT settings <lt/> 2.4V)
• VOUT pull-down resistor in shutdown is 10Kohm typ at (TA = 25°C)
• Deliverable output current is 8.3mA minimum at (10mA IPEAK setting)
• P-channel MOSFET switch on-resistance is 16ohm typical at (10mA IPEAK setting)
• Operating temperature range from -40°C to 125°C
• 12-ball WLCSP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party