| ₹ 363.25 includes GST and import duties. | |
| B2B customers can avail ₹ 55.4 ITC on this product | |
| 100% Secure Payments | 100% Genuine product |
Description
The 23LCV1024-I/P is a 1Mb SPI Serial SRAM with battery backup and SDI interface. The memory is accessed via a simple serial peripheral interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a chip select (CS) input. Additionally, SDI (serial dual interface) is supported if application needs faster data rates. The SRAM can be battery backed via the Vbat pin essentially making the SRAM non-volatile. The device also supports unlimited read and write cycles to the array.
- SPI-compatible bus interface - 20MHz clock rate, SPI/SDI mode
- Low-power CMOS technology
- 3mA at 3.6V, 20MHz Read current
- 4µA at +85°C Maximum standby current
- Unlimited read and write cycles
- Zero write time
- 32-byte page
- Battery-backed SRAM support via Vbat Pin, automatic switchover to Vbat
- Sequential mode reads and writes
- High reliability
Applications
Communications & Networking
Product details
| Operating Temperature Min | -40°C |
| Supply Voltage Range | 2.5V to 5.5V |
| Operating Temperature Max | 85°C |
| Access Time | - |
| No. of Pins | 8Pins |
| SRAM Memory Configuration | 128K x 8bit |
| Memory Size | 1Mbit |
| Product Range | - |
| Automotive Qualification Standard | - |
| Memory Case Style | DIP |
| Packaging | Each |
| MSL | - |
Other details
| Brand | MICROCHIP |
| Part Number | 23LCV1024-I/P |
| Quantity | Each |
| Technical Data Sheet EN |  |
| Miscellaneous EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 355.99 |
| 3-5 | ₹ 352.35 |
| 5-10 | ₹ 345.09 |
| 10+ | ₹ 337.82 |
Bulk discount will be automatically applied during checkout based on quantity.