ANALOG DEVICES ADM3067ETRZ-EP RS485 Transceiver, Full Duplex, 50Mbps, 1 Transmitter/Receiver, 5.5V Supply, -55 to 125 °C, NSOIC-14

ADM3067ETRZ-EP is an IEC electrostatic discharge (ESD) protected RS-485 transceiver allowing the device to withstand ±12kV contact discharges on the transceiver bus pins without latch-up or damage. It features a VIO logic supply pin that allows for a flexible digital interface capable of operating as low as 1.62V. It features a one-fourth unit load input impedance, which allows up to 128 transceivers on a bus. The ADM3067E-EP is a full duplex RS-485 transceiver option. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. If a significant temperature increase is detected in the internal driver circuitry during fault conditions, this feature forces the driver output into a high-impedance state. Application includes industrial fieldbuses, process control, building automation, PROFIBUS networks, motor control servo drives and encoders.

• TIA/EIA RS-485 compliant over full supply range
• 3.0V to 5.5V operating voltage range on VCC
• IEC 61000-4-2 ? ±12kV contact discharge, IEC 61000-4-2 ? ±12kV air discharge, HBM ? ±30kV
• Full hot swap support (glitch free power-up/power-down)
• Maximum data rate is 500Kbps min (TA = 25°C, VIO = VCC = 3.3V)
• Full receiver short-circuit, open circuit, and bus idle fail-safe
• PROFIBUS compliant at VCC ? 4.5V, 1 assembly/test site, 1 fabrication site
• Allows connection of up to 128 transceivers onto the bus
• Supports defence and aerospace applications (AQEC standard), controlled manufacturing baseline
• 14 lead SOIC-N package, temperature range from -55°C to +125°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party