AD5110 is a single-channel, 128 position, I²C, 8% resistor tolerance, non-volatile digital potentiometer. It provides a non-volatile solution for 128 position adjustment applications, offering guaranteed low resistor tolerance errors of ±8% and upto ±6mA current density in the A, B, and W pins. The low resistor tolerance, low nominal temperature coefficient and high bandwidth simplify open loop applications, as well as tolerance matching applications. The new low wiper resistance feature minimizes the wiper resistance in the extremes of the resistor array to only 45ohm, typical. Application includes mechanical potentiometer replacement, portable electronics level adjustment, audio volume control, low resolution DAC, LCD panel brightness and contrast control, programmable voltage to current conversion, programmable filters, delays, time constants, feedback resistor programmable power supply, sensor calibration.
- 35ppm/°C typical resistance temperature coefficient (code = full scale, -40°C < TA < +125°C)
- 2.5µA max at 2.7V and 125°C low power consumption
- 2.5µA maximum positive supply current (VDD = 5V, -40°C < TA < +125°C)
- 4MHz typical bandwidth (RAB = 5Kohm, -40°C < TA < +125°C)
- Power-on EEPROM refresh time < 50µs
- 50-year typical data retention at 125°C, 1 million write cycles
- 2.3V to 5.5V analogue supply operation range, 1.8V to 5.5V logic supply operation range
- 7bits minimum resolution (-40°C < TA < +125°C)
- 1.5LSB maximum zero-scale error (RAB = 10Kohm, -40°C < TA < +125°C)
- 8 lead LFCSP package, operating temperature range from -40°C to +125°C
Product details
| End To End Resistance:
10kohm
|
| No. of Pots:
Single
|
| Control Interface:
I2C
|
| Track Taper:
Linear
|
| Resistance Tolerance:
± 8%
|
| Supply Voltage Min:
2.3V
|
| Supply Voltage Max:
5.5V
|
| Potentiometer IC Case Style:
LFCSP-EP
|
| No. of Pins:
8Pins
|
| No. of Steps:
128
|
| Temperature Coefficient:
35ppm/°C
|
| Operating Temperature Min:
-40°C
|
| Operating Temperature Max:
125°C
|
| Product Range:
-
|
| Automotive Qualification Standard:
-
|
Other details
| Brand |
ANALOG DEVICES |
| Part Number |
AD5110BCPZ10-1-RL7 |
| Quantity |
Each (Supplied on Cut Tape) |
| Technical Data Sheet EN |
 |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
