Dracast Daylight 3-Light Interview Kit with V-Mount Battery Plates

Ideal for location shooters, Dracast Daylight 3-Light Interview Kit with V-Mount Battery Plates and Stands is comprised of 2 LED500 Pro Daylight lights, each with a multi-voltage power adapter, soft case, an 8.7' light stand, V-Mount battery plate and battery. A dual charger is included for the batteries. An LED160A Daylight light is also included with a power supply, built-in Sony NP-F series battery plate, battery, charger and soft case. And, this kit has two filter frames and two filter packs for use with the LED500 lights.

The Daylight LED160A employs 160 LEDs, with a CRI rating of 95, providing 5,600K output with precise, accurate color rendering and a beam spread of 45 degrees. It features an aluminum chassis for strength and durability but weighs only 1/2 pound. A built-in dimmer controls light output from 0 to 100% without flicker at any frame rate. A separate knob controls the color temperature balance of the LEDs. The light runs on AC via an adapter or on NPF-type camera batteries that mount to its built-in battery plate.

At just 4.0 lb the LED500 Pro Daylight LED Light is an ideal choice for location work, interviews and small sets where color accuracy, control and flicker-free output are of major importance. A daylight-balanced color temperature of 5,600K means users can quickly and easily match natural lighting as well as other lights. Dimming is equally convenient via another knob that adjusts the light intensity from 0-100% with negligible color shift. The LED500 outputs the hot light equivalent of 500W but you won't have to be concerned about the talent's comfort - the panel runs barely warm to the touch. And the low electrical draw of just 30W means a timely return on your investment.

The durable anodized aluminum frame is supported by an oversized, U-shaped yoke with locking knobs on each side and a standard 5/8" receiver. The LED500 can be used worldwide, powered by a 100-240VAC adapter or by optional 12VDC batteries.

• LED500 Pro Daylight LED Light with V-Mount Battery Plate

  At 4 lb the LED500 Pro Daylight LED Light with V-Mount Battery Plate from Dracast is an ideal choice for the studio or location work where color accuracy, control and flicker-free output are of major importance. The LED500's daylight balanced output is well suited for outdoor work or color matching HMI fixtures, while its high CRI of 95 renders colors with precision and fidelity. Dimming from 100-0% is conveniently done with a back-panel knob that adjusts the output with negligible color shift. The low electrical draw of just 30W means a timely return on your investment.

  The durable anodized aluminum frame is supported by an sturdy, U-shaped yoke with locking knobs on each side and a standard 5/8" receiver. This LED500 can be used worldwide thanks to its included 100-240 VAC power adapter. You can also use the onboard V-Mount battery plate with 14.8 VDC batteries when mains power is unavailable. Accessories include optional 4-way barndoors for contouring and control of the LED500's 45-degree beam angle. A carrying case is included.

  Photometrics

  5,500 lux / 511 fc at 3.0' (0.9m)
  1,550 lux / 144 fc at 6.0' (1.8m)
  725 lux / 53 fc at 9.0' (2.7m)

  UPC: 720189882869
• LED160 5600K Daylight On-Camera Light with Battery and Charger (Aluminum, Blue)

  This is a 5600K daylight-balanced Dracast LED160 On-Camera Light , housed in an aluminum, blue case and measures a compact 6 x 4". It features a high, 160W equivalent light output with a 45&deg flood beam angle. It'll give you approximately 20 ft effective distance.

  Key Features

  • 5600K daylight-balanced LED light
  • 160W equivalent light output
  • 45&deg flood beam angle
  • Approximately 20 ft effective distance
  • >95 CRI
  • Brightness dimmer dial on the rear
  • Integrated L-series battery plate
  • 4-LED indicator on the rear
  • NP-F990 L Series battery (runs approximately 5-6 hours) and charger included

  UPC: 753807556712
• Battery and Dual Charger Kit (V-Mount)

  This Battery and Dual Charger Kit from Dracast is comprised of two V-mount lithium-ion batteries and a portable dual V-mount battery charger for refreshing up to two batteries simultaneously. Each of the 14.8V batteries have an 89Wh capacity, built-in power tap, and an integrated five LED status indicator for quickly gauging the power level. The included charger is fitted with dual V-mount plates for charging one or two batteries at a time. The unit incorporates a 4-pin XLR DC input as well as a capacity management system to ensure fast charging speeds.

• Filter Frame for LED500 Light

  The Dracast Filter Frame for LED500 allows the use of Dracast or other brand diffusion, CTO, CTB or effects filters with the fixture. Constructed of lightweight aluminum, the frame drops into the fixture's accessory channel. It has a frame lock to prevent filter slippage.

  UPC: 720189881152
• Filter Set for LED500 Light (5-Piece)

  The Dracast 5 Filter Set for LED500 Light contains rigid light modifiers that measure approximately 12 x 6" to match the fixture. Included in the kit are one each: 1/4, 1/2, and Full CTO filters to change the light's daylight balance to tungsten. A Half White Diffusion and an Opal Frost Diffusion Filter are also included to soften the light's output.

  UPC: 753807556835

• Carry Case

• AC Power Adapter for LED500 Light

• Limited 1-Year Warranty

• Nylon Soft Case

• Shoulder Strap

• Hot-Shoe Mount

• P-Tap to DC Connector Cable

• Power Supply 2-Prong U.S.

• NP-F990 L Series Battery

• Charger

• Limited 1-Year Warranty

2 x
• 89W/h Lithium-ion Battery - V-Mount

• Dual Battery Charger (V-Mount)

• Limited 1-Year Warranty

• CTO Filter (Full)

• CTO Filter (1/2)

• CTO Filter (1/4)

• Half White Diffusion Filter

• Opal Frost Diffusion Filter

Also Includes

• Sony NP-F Battery with Charger
• 2 x Barndoors
• 2 x 8.7' Light Stands
• Hard SKB I Series Case