| ₹ 38765.0 includes GST and import duties. | |
| B2B customers can avail ₹ 5911.66 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
be quiet! SILENT BASE 802 Overview
- 1Description
- 2Interchangeable Parts
- 3Noise Dampening
- 4Front I/O Ports
- 5Versatile Motherboard Tray
- 6PSU Shroud
Install high-quality components while reducing system noise with the Silent Base 802 Mid-Tower Case from be quiet! The frame of the Silent Base is constructed from steel and ABS plastic components that integrates noise-canceling mats that reduce noise produced from fans and other internal components without compromising thermal efficiency. Interchangeable top and front covers allow you to customize your build and install various fans and water-cooled systems, making this case ideal for any builder looking for flexibility and whisper-quiet operation. View your hard work with the tempered glass side panel, providing safety while giving you a clear look at your components.
The Silent Base 802 supports E-ATX, ATX, micro-ATX, and mini-ATX motherboards, giving you plenty of options when it comes to component choice. With seven horizontal and two vertical PCI expansion slots, you can install a wide array of utility and graphics cards up to 17 inches long. With the HDD cage installed, you can install a graphics card up to 11.3 inches long. Mount solid-state and hard disk drives with seven 2.5 and three 3.5" drive bays, which can be expanded up to fifteen and seven bays respectively with additional hardware. A robust front panel gives you access to a USB 3.2 Gen 2 Type-C port, two USB 3.2 Gen 1 Type-A ports, two 3.5mm audio jacks for headphones and mics, and a fan switch. Additionally, the Silent Base 802 includes front and bottom dust filters that keep your system tidy and clean.
Interchangeable Parts
Noise Dampening
Front I/O Ports
Versatile Motherboard Tray
PSU Shroud
In the Box
- be quiet! Silent Base 802 Windowed Mid-Tower Case (Black)
- HDD Cage
- 4 x HDD Rubber Decoupling
- 12 x 6#32 Screws
- 12 x M3 Screws
- 12 x HDD Screws
- 6 x Cable Management Ties
- Limited 3-Year Warranty
- Description
- Interchangeable Parts
- Noise Dampening
- Front I/O Ports
- Versatile Motherboard Tray
- PSU Shroud
be quiet! SILENT BASE 802 Specs
| Motherboard Support | ATX, E-ATX, Micro-ATX, Mini-ITX |
| External Drive Bays | None |
| Internal Drive Bays | 7 x 2.5" And 3 x 3.5" |
| Expansion Slots | 7 x Full Height + 2 |
| Maximum GPU Length | 17.0" / 432 mm |
| CPU Cooler Height | 7.3" / 185 mm |
| Supported PSU Size | ATX |
| Maximum PSU Length | 11.3" / 288 mm |
| Fan Mounting (Front) | 1 x 120 mm Or 1 x 140 mm |
| Fan Mounting (Top) | 3 x 120 mm Or 3 x 140 mm |
| Fans Included (Front) | 2 x 140 mm (1000 rpm) |
| Fans Included (Rear) | 1 x 140 mm (1000 rpm) |
| Maximum Radiator Size (Front) | 420 mm |
| Maximum Radiator Size (Rear) | 140 mm |
| Maximum Radiator Size (Top) | 360 mm |
| Fan Mounting (Internal) | 1 x 120 mm Or 1 x 140 mm |
| Fan Controller Included | Yes |
| Filter Locations | Bottom, Front |
| Connections | 1 x USB Type-C (USB 3.1 / USB 3.2 Gen 2) 2 x USB Type-A (USB 3.1 / USB 3.2 Gen 1) |
| Media/Memory Card Slot | None |
| Audio Connections | 1 x 3.5 mm Input 1 x 3.5 mm Output |
| Display Connections | None |
| Windowed Panel | Yes |
| Material | Plastic, Steel, Tempered Glass |
| Certifications | CE, RoHS, as per Manufacturer |
| Built-In Lighting | No |
| Dimensions (W x H x D) | 21.2 x 21.8 x 11.1" / 539 x 553 x 281 mm |
| Weight | 28.99 lb / 13.15 kg |
| Package Weight | 32.635 lb |
| Box Dimensions (LxWxH) | 24.3 x 14.2 x 11.7" |
be quiet! SILENT BASE 802 Reviews
Easy to work
I don't have to many experiences building PCs, I have built only 3 and this case is the easiest one by far. Excellent airflow and it is pretty silent.
Well built case with excellent airflow
Had one small issue with one leg on the case but they sent a replacement for free after emailing customer service.
A Great Tower Case
So far, I'm very pleased with this Be Quiet! case. As the name implies, it's pretty silent. I'm running it with the mesh options and not the sound-insulated panels, and it's quieter than my last case which was sealed up tight with sound-insulating foam. Low fan speeds and good airflow definitely make for a better solution than higher fan speeds and insulation. Build quality is good, although I'd have preferred that Be Quiet! sacrifice some of the drive bays to allow the cable pass-through holes to be moved forward. My board is large enough to cover the rubber-dressed pass throughs, so they're useless to me. Those with smaller motherboards won't have trouble. My biggest complaint is the space available for cable management. An extra half-inch behind the motherboard would have made all of the difference. As it is, it's pretty tight. More loops for tying cable would be appreciated, as well. All-in-all, it's a good case that I wouldn't hesitate to recommend to anyone except those that have an abnormally large amount of components to install.
Great all around case
This is probably one of the better cases when it comes to mechanical design. Buttons to release the side panels, easy front panel removal, full lenght bottom filter, 140mm fan fitment everywhere and removable fan/rad tray up top. My 420aio fits up fron no problem even with a push pull configuration and added 3 140mm fans in the rest of the case. I did take out the included fans that came with the case, they were very flimsy and low speed. Overall very happy with the case, the only con would be the included fans but i didnt plan on using them from the start so that didnt matter to me.
Recently received and under assembly
After apparent supply chain delivery issues, I received my Silent Base 802 tower. A bit worried by the long torturous FedEx journey but the package was intact and contents in great shape. The timing of the case arrival with the holidays has delayed start of assembly so just getting around to the peripheral assembly. The case is as well designed as advertised and looking forward to transplanting my new motherboard from its temporary case.
Great Case!
This case is the perfect size for the components that I am running, including a custom water loop. Accommodates a 420mm and a 240mm radiator with no issues. Well designed and well built. Very nice to build in. Side panels are installed and removed very easily as well.
Solid case
Its a really big case for a mid-tower but it comes with both air focused and silenced focus panels. As well as a fan hub in the back that connects to the front panel io which is nice.
Quiet, well designed
The side panels are easy to get on and off, the top radiator tray makes installation super easy, space is ample, cable management is decent, airflow is good, the fans are fairly quiet, and everything is well built. There are no parts that don't line up, poor design choices or noticeable compromises. Note that the mesh front will provide much better airflow and allow for lower fan speeds and with similar noise levels while keeping components cooler. My only nitpick would have been to include 280 and 420mm top radiator support, but those might have made the case obnoxiously big
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 37989.7 |
| 3-5 | ₹ 37602.05 |
| 5-10 | ₹ 36826.75 |
| 10+ | ₹ 36051.45 |
Bulk discount will be automatically applied during checkout based on quantity.