MICROCHIP WINCS02PE-I/100 Wi-Fi Module, PCB Antenna, Network Controller, 2.4 GHz, I2C, PTA, SPI, UART, WINCS02 Series

WINCS02PE-I/100 is a Wi-Fi® network controller module with PCB antenna. The WINCS02 is a fully-integrated module based on WINCS02IC. It contains all necessary external components and antenna to simplify a new board design. The module is interoperable with various vendors' 802.11 b/g/n access points. The module has a compact form factor of 21.7 mm x 17.3 mm x 2.1 mm. The WINCS02IC is a low power consuming IC containing a 2.4GHz IEEE® 802.11b/g/n-compliant radio with integrated High Power Amplifier (HPA), Low Noise Amplifier (LNA), Radio Frequency (RF) switches for TX/RX control and hardware-based security accelerator. The WINCS02IC is designed to execute Microchip-provided Wi-Fi® and Networking stack components accessible through a Serial Peripheral Interface (SPI).

• Operating voltage VDD and VDDIO: 3.0-3.6V (3.3V typical)
• Compliant with IEEE® 802.11 b/g/n single spatial stream of 20MHz channel bandwidth
• TCP/IP-based connectivity protocols along with SSL and MQTT capabilities
• Supports STA mode and soft AP functionality in IEEE 802.11 infrastructure and IBSS networks
• Protected Management Frame (PMF) handled in hardware, WPA3 support
• Integrated Power Amplifier (PA), TX/RX switch and power management
• Internal flash memory (2MB) to store firmware, immutable secure boot with H/W root of trust
• Supports host assisted OTA firmware update, SPI host interface, secure DFU
• Hardware-based IEEE 802.15.2 compliant 3-wire PTA interface for Wi-Fi/Bluetooth® coexistence
• Industrial temperature range from -40°C to 85°C