ANALOG DEVICES ADA4610-1ARZ-R7 Operational Amplifier, 1 Channels, 16.3 MHz, 25 V/µs, ± 5V to ± 15V, NSOIC, 8 Pins

ADA4610-1ARZ-R7 is a low noise, precision, rail-to-rail output, JFET single channel opamp. The combination of low offset, noise, and very low input bias current makes this amplifier especially suitable for high-impedance sensor amplification and precise current measurements using shunts. With excellent DC precision, low noise, and fast settling time, the ADA4610-1 provides superior accuracy in medical instruments, electronic measurement, and automated test equipment. Unlike many competitive amplifiers, the ADA4610-1 maintains fast settling performance with substantial capacitive loads. Unlike many older JFET amplifiers, the ADA4610-1 does not suffer from output phase reversal when input voltages exceed the maximum common-mode voltage range. It is used in applications such as instrumentation, medical instruments, multipole filters, precision current measurement, photodiode amplifiers, sensors, and audio.

• No phase reversal, rail-to-rail output, unity-gain stable
• Offset voltage is 0.4mV typical at (VSY = ±5V, VCM = 0V, TA = 25°C)
• Input bias current is 1µV/°C typical at (VSY = ±5V, VCM = 0V, TA = 25°C)
• Common-mode rejection ratio is 110dB typical at (VCM = -2.5V to +2.5V)
• Supply current per amplifier is 1.50mA typical at (IOUT = 0mA, VSY = ±5V, VCM = 0V, TA = 25°C)
• Gain bandwidth product is 15.4MHz typical at (VIN = 5mV p-p, RL = 2Kohm, AV = 100)
• Total harmonic distortion + noise is 0.00025% typical at (1KHz, AV = 1, RL = 2Kohm, VIN = 1V rms)
• Voltage noise is 0.45µV p-p typical at (0.1Hz to 10Hz, VSY = ±5V, VCM = 0V, TA = 25°C)
• Slew rate (rising) is 21V/µs typical at (VSY = ±5V, VCM = 0V, TA = 25°C)
• Operating temperature range from -40°C to +125°C, 8-lead SOIC-N package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party