- 1/4" Progressive-Scan CMOS Sensor
- 1MP Resolution @ 30 fps
- 4.2mm Fixed Lens
- 53.8� Horizontal Angle of View
- H.264 and MJPEG Compression
- Built-In Microphone
- PoE Power Source
- Simultaneous Dual Streaming
- 4 Configurable Privacy Masks
- CS Lens Mount
The 1MP Cube Camera from ACTi features a 1/4" progressive-scan CMOS image sensor to deliver high-quality images at a resolution of up to�1280 x 720 at 30 fps. The 4.2mm fixed lens with an f/1.8 aperture provides a 53.8� horizontal field of view. Wide dynamic range, white balance, automatic gain control, and digital noise reduction features allow for clear images when there is ambient lighting or in low-light scenarios.
Motion Detection triggers an alarm when movement is detected in a designated portion of the video display, and 4 configurable privacy masking regions enable you to block certain portions of an image for security reasons. A built-in microphone and a 3.5mm jack offer two-way audio, enabling you to communicate with those you are monitoring. The camera also comes with a terminal block which allows you to attach an additional speaker and/or microphone.
- Progressive scan CMOS sensor
- Minimum illumination of 0.1 lux at f/1.8
- Built-in 4.2mm lens allows you to record footage in 1MP resolution at 30 fps
- Selectable H.264 and MJPEG compression formats with dual streaming
- Two-way audio (speakers available separately)
- Video motion detection
- Powered by PoE Class 2
In the Box
ACTi 1MP Cube Camera with 4.2mm Fixed Lens and Terminal Block
- Bracket
- Limited 3-Year Warranty
| Device Type | Cube Camera |
| Image Sensor | 1/4" Progressive-scan CMOS |
| Day/Night | No |
| Minimum Illumination | Color: 0.1 lux at f/1.8 (30 IRE, 2400�K) |
| Mechanical IR Cut Filter | No |
| IR Sensitivity Range | No |
| Electronic Shutter | 1/5 to 1/2000 sec (Manual / Auto mode) |
| Lens |
| Focal Length / Aperture | 4.2mm fixed lens |
| Aperture | f/1.8 |
| Iris | Fixed iris |
| Focus | Manual focus |
| Lens Mount | CS-Mount (interchangeable lens) |
| Horizontal Viewing Angle | 53.8� |
| Video |
| Compression | H.264 HP and MJPEG |
| Maximum Frame Rate vs. Resolution | 30 fps at 1280 x 720 (HD 720p)
30 fps at 640 x 480 (VGA) |
| Multi-Streaming | Simultaneous dual steams based on 2 configurations |
| Bit Rate | 28 Kbps to 6 Mbps (per stream) |
| Bit Rate Mode | Constant, Variable |
| Image Enhancement | Basic WDR; White balance: automatic, hold, and manual; Brightness; Contrast; Automatic gain control; Digital noise reduction; Flicker-less |
| Privacy Mask Type | 4 configurable regions |
| Text Overlay | User-defined text on video |
| Image Orientation | Image flip and mirror |
| Audio |
| Compression | 8 kHz, Mono, PCM, 16-bit encoding; G.711 |
| Audio In | Built-in Microphone |
| Audio Out | 3.5mm jack |
| Network |
| Protocol | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour |
| Ethernet Port | 1, Ethernet (10/100 Base-T), RJ-45 connector |
| Security | IP address filtering; HTTPS encryption; Password-protected user levels; IEEE 802.1X network access control |
| Alarm |
| Alarm Triggers | Video motion detection (3 regions) |
| Alarm Response | Notify control center; Change camera settings; Command other devices; email notification with snapshots; upload video, snapshot to FTP server |
| General |
| Power Source | PoE Class 2 (IEEE802.3af) |
| Power Consumption | 3.15 W |
| Mount Type | Wall, Ceiling |
| Operating Temperature | 14 to 113�F (-10 to 45�C) |
| Operating Humidity | 10 to 85% RH |
| Approvals | CE, FCC |
| Integration |
| Unified Solution | Fully compatible with ACTi software |
| ISV Integration | Software Development Kit (SDK) available; ONVIF compliant |
| Firmware Access Browser | Microsoft Internet Explorer 6.0 or newer |
| Dimensions (W x H x D) | 3.8 x 3.8 x 1.8" (96 x 96 x 45.07 mm) |
| Weight | 0.45 lb (0.20 kg) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
